Windows 10: System gives Bluescreens when restarting PC

I recently upgraded most of my pcThe problem is that when I plug my old 2x8gb Ram it will give me constant bluescreens after some use if I restart the pc or run a windows memory diagnostic.It's not something that happens randomly, it's after the pc heats up? or after some medium use, and only if I turn it off and on again.I think the problem might be incompatibility with the motherboard, but I don't really know anymore. Any help would be appreciatedI determined that the ram is not faulty since if I place it into my brother's pc it works just fineI also checked that the slots are healthy, sin

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

BlueScreen

I`ve a problem. My PC restarts spontaneously.

Info after restart:

Code: BlueScreen BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050031 BCP3: 00000000000006F8 BCP4: FFFFF88004220FA1 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1[/quote]

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount