Windows 10: System keeps restarting

Dear all,Can you please help with my Windows 10PC keeps restarting after showing blue screen. I'm struggling with this for a year now. Sometimes system crashes once a week, sometimes several times a day.Event viewer displays this information:The computer has rebooted from a bugcheck. The bugcheck was: 0x000000e6 0x0000000000000026, 0x0000000000000000, 0x000000000882d77e, 0x0000000000000004. A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: a2a5bb89-24cf-4ece-bf1d-b08c

:)

 

MBR keeps corrupting after restart

I have a machine that when restarted or allowed to go into hibernation, I receive a missing/corrupted master boot record message and Windows doesn't boot. I am able to successfully repair the MBR each time using Windows recovery console, but I'm unable to determine what keeps making it happen.

Dell Latitude E6420
Windows 7 64bit

Steps performed so far: -besides fixing the MBR after each restart or hibernation
-ran system file checker sfc /scannow
-ran chkdsk
-verified that ACHI was enabled in the bios

If I can't figure this out I will end up just reinstalling the operating system, but I worried that the issue with just reoccur later down the line. Any advice/recommendations would be much appreciated.

 

System freezes after restart on Windows 10

Hi,

Thank you for keeping us posted.

I suggest you to follow the steps below to perform DISM and check if it helps:

• Open command prompt by pressing Windows key + X and selecting “Command prompt admin”.
• In command prompt, type the following commands and press Enter after each command:

DISM.exe /Online /Cleanup-image /Scanhealth

DISM.exe /Online /Cleanup-image /Restorehealth

• Close the command prompt and restart the PC and check if it works.

Please get back to us with updated status, we will be happy to assist you.

 

Windows 10, Will not restart after System Restore.

Hi Michael,

We apologize for the delay in response.

I suggest you to perform a Power drain by following the steps provided below:

• Shut down the Computer.
• Remove all power source (including battery if it is a laptop).
• Press and hold the power button for 15-20 seconds.
• Connect the power source and start the computer.

If the issue still persists,

Check if the system boots to Safe mode using the ISO by following the steps below:

• Insert the installation media you created, and then restart your PC.
• On the Install Windows screen, select Repair your computer. (If you’re not seeing this screen, your PC might not be set up to boot from a drive. Check your PC manufacturer's website for info on how to boot from media,
  and then try again.)
• On the Choose an option screen, select Troubleshoot. From there, you can use Safe Mode. Select
  Advanced Options > Startup Settings > Restart.
• After your PC restarts, select 5 or F5 to restart you PC in Safe Mode with Networking. If your PC won’t start in Safe Mode with Networking, try steps 2-4 again, and then, after your PC restarts, select 3 or F3 to
  Enable low-resolution video.

Keep us posted on the status for further assistance.