Windows 10: System not booting After HDD rearrangement

Hello, On My system i had a primary m.2 drive with Windows 10 recently upgraded to Windows 11 plus 2 1TB HDD and 1 2TB HDD. I bought a 4TB to replace the 2 1TB HDDs. After copying all files in the new drive i switched off my PC, removed the 2 drives and placed my new drive and the 2TB drive only wich was my final intention. Turner on My PC and It asks me to select a proper boot drive o insert boot media. The following actions were performed and not working. The primary m.2 drive Is correctly shown in the BIOSBoot order Is correctI tried putting all drives as they wereTried inserting Win1

:)

 

Changing boot hdd

I downloaded PartitionMagic8.0, but the partition i want to make is not bootable.
So the system boots from the old, loud hdd, and when i unplug the old, it doesnt boot.
Any advice or suggestions how to change boot hdd without reinstalling Winxp?

 

unlock hdd

Hi Johan,

It is possible that your
HDD was unreadable
causing the error message to appear. We recommend that you perform these troubleshooting steps and check if there are any changes:

• 
  Shutdown
  your
  PC.
  
• 
  Unhooked
  the
  HDD
  and
  turn on
  your
  PC.
  
• 
  Reconnect
  your
  HDD
  and
  restart
  your
  PC.
  

If the issue persists, we suggest that you contact your
laptop/computer's manufacturer
for further assistance.

Update us on how it goes.

Regards.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.