Windows 10: tap 64bit driver

tap 64bit driver download i need for my vpn to work please give link

:)

 

Can't Install tap driver

Hello amogh devgun,

To better assist you with your concern, I'd like to know the following information:

• Confirm which build is currently installed on your device. To check, follow the steps below:

1. Press Windows key + R, then type in winver.
2. Click OK.

• What is the VPN client that you're using?
• Are you using any third-party antivirus? If yes, try to disable it and then install the TAP driver.

Looking forward to your response.

Regards.

 

Uninstall TAP Windows Adapter V9

SOLVED

• Step 1: Download OpenVPN and install with ALL features from HERE : Community Downloads | OpenVPN
• Step 2: Open CMD.exe as administrator and go to the file location of "C:\Program Files\OpenVPN\bin" or whatever that turns out to be.
• Step 3: Follow the "Installing and uninstalling TAP-drivers" section from the website
  
  HERE : https://community.openvpn.net/openvpn/wiki/ManagingWindowsTAPDrivers
• OR JUST READ BELOW
• Step 4: How to get the <id> for the next section:
  • Go to Network Connections
  • Right click the TAP device you want to remove
  • Click Properties
  • Click Details
  • Using the drop-down menu, get the Hardware ID
    • This is usually something like: tapoes, tap0901 etc
• Step 5: Remove those suckers by typing the following into CMD: tapinstall.exe remove (ID from step 4)
  • it should look something like this below:

• Step 6: If you have devices that were not removed, repeat Steps 4-5 for all TAP adapters
• Step 7: Restart!
• Step 8: Uninstall OpenVPN and you're all set!

Supplementary information from the site:

Occasionally you may need play with different TAP-driver versions. In this case you can use devcon.exe from the Windows command-prompt. Below are some common commands you can run from an administrator Powershell
or cmd.exe console:

List available TAP-Windows adapters:

List network interfaces (incl. TAP-Windows adapters):

View information about an installed driver:

Uninstall a TAP-driver:

To verify TAP-driver removal:

Install a new TAP-driver:

Update a TAP-driver:

Notes:

• <id> refers to the driver identifier which is tap0901 for OpenVPN 2.2+, but may be different in older/newer OpenVPN versions.
• <something.inf> is typically OemWin2k.inf (old tap-drivers) or OemVista.inf (newer tap-drivers). You need to specify the full path to this file, e.g.C:\Program Files\TAP-Windows\driver\OemVista.inf.

By installing multiple times, you will create additional TAP-Windows adapter instances, which can be used for multiple concurrent VPN tunnels. It is also possible to install using Control Panel -> Add New Hardware,
and it is possible to uninstall using Control Panel -> System -> Hardware -> Device Manager.

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <How to perform a clean boot in Windows>