Windows 10: The Answer To Network Issues After November Update

If you have recently updated Microsoft Windows, and have lost the ability to view your networked computers or shared folders in File Explorer, here is the fix: On each networked computer, change the computer name to contain only capital letters without numbers, symbols, or spaces. Open a windows command prompt as administrator, and type the following: netcfg -d Reboot each of the systems after the above is completed. Some caveats: If you are accessing any of the networked computers remotely, such as via software KVM, be careful because the instant you type ‘netcfg -d’ you will be booted o

:)

 

Issues with network adapters

Hi Alfonso,

To resolve this issue, we suggest that you run the Network troubleshooter when you switch from WiFi to Ethernet connection. The Network troubleshooter can help diagnose and fix common connection problems including clearing the network cache to obtain a new
IP from the new network. Kindly follow the steps below:

• In the search box on the taskbar, type Identify and repair network problems, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that fixes the problem.

If the issue persists, kindly try the troubleshooting steps on the following link:

Fix network connection issues in Windows 10.

We recommend that you try the steps on the Update the network adapter driver,
Run the Network troubleshooter followed by networking commands, and Use network reset to reinstall network devices sections.

Let us know how it goes for us to assist you further.

 

Post November Update Installation Issues

Hi,

Thank you for posting your query in Microsoft Community.

We would be glad to help you with the issue you are facing today. I understand the difficulty with the problem.

Issue: Bluetooth Device Error- Error Code 43.

I would suggest you to check if in the Device Manager, an exclamation mark in a yellow circle is displayed for the device. When you view the properties of the device.

Check Device Manager.

• Press Windows + X, click on Device Manager.
• Check for any exclamation marks in there.

If exclamations mark are there on any device name, try to update them by right clicking on them.

Also follow below steps.

Run Hardware and Device troubleshooter.

• Type troubleshooting in the search bar.
• From the search list, click on troubleshooting
• On the left pane, click on view all.
• From the list click on hardware and devices troubleshooter.
• Follow on screen instructions to complete the troubleshooting

Issue:
Windows Update Error- Error Code 0x8024402f &
Windows Defender Error- Error Code 0x80240438

I would suggest you to manually reset Windows Update components.

Reset Windows update components from the following link:

http://support.microsoft.com/kb/971058





Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore,
make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following
article number to view the article in the

Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

How to back up and restore the registry in Windows

Issue:Broken/Damaged Media.

After updating November update I suggest you to check if the windows is activated or not.

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be happy to assist you.

Thank you.

 

Windows 10 Networking Issue: After Windows Reset I can connect to network but no internet

Thank you for the update. For us not to repeat the troubleshooting steps you've already performed, could you tell us the troubleshooting steps that you've already performed?

Also, we suggest trying to run the Network troubleshooter to help with your issue. To do that, follow the steps below:

• Type Network troubleshooter in the Cortana search box.
• Then select Identify and repair network problems.
• Follow the steps in the troubleshooter and see if it fixes the problem.

Get back to us and give us an update.