Windows 10: The boot of windows crash after upgrade

The boot of windows crash after upgrade. Can help me? i tried to init winRe, with the key f8 and then try reboot the computer two times, but i can not boot winRe.I want to init winRe for recovery the older version, before upgrade.The code of detention is: 0xc000021a

:)

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

all games crash!

ive watch my temps and both the cpu and gpu are within normal ranges. when it freezes it simply freezes the image and stops the sound. i must reboot to get back to windows.

 

Upgrade crashes: It now will not boot into windows at all and just goes into the blue troubleshooting screens

Hi Enger,

I regret the inconvenience you’re facing regarding Windows 10 upgrade, and I appreciate for trying the steps to fix the issue.

To assist you better, I request you to answer the following question:

• 
  Did you receive any error message while upgrading?
  
• 
  “Blue troubleshooting screens” do you refer to the Advance boot options for windows 10?
  

If you are not able to boot to the desktop screen, I suggest you to install the windows 10 using Media creation tool and check if it helps.

I suggest you re-built the boot record by following the below commands so that you can boot to the desktop screen and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the Advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• 
  bootrec /fixmbr
  
• 
  bootrec /fixboot
  
• 
  bootrec /scanos
  
• 
  bootrec /rebuildbcd
  

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

Thank yoou.