Windows 10: The hard drive isn't working

I tried connect other device but it doesn't work so my guess is hard drive is a problem but the good news is the light is on so the power is already on but they aren't showing up different devices. It is old HDD Iomega and and it running windows 10. It isn't showing in device manager and I have 2 USB port. It was working in few weeks ago in different laptop. It doesn't make a noise when I connect to the laptop.

:)

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

Cortana isn´t working

When I hit enter, it did something, but there´s still no Cortana, even after restart. So I tried it again, but now it says that it failed, because it´s already installed and it´s working in PC. So it should work, but Cortana still isn´t here.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!