Windows 10: the imaging through the config manager ts fails

When attempting to image a computer using the Configuration Manager task sequence, the process fails and displays a blue screen halfway through, with a message indicating a need to connect to the network. However, no network adapter is available.

:)

 

Imaging Devices missing in Device Manager and Webcam doesn't working

Hi,

Since you mentioned that the said driver is missing in Device Manager, what we suggest is for you to check in the Hidden Devices section on Device Manager. Kindly follow the steps below:

• On the desktop, press Windows key + X and select
  Device Manager.
• Click on View and select
  Show Hidden Devices.
• Check for the webcam under Imaging Devices.
• If the webcam is listed, then right-click on it and select
  Update Driver Software
• Select Browse My Computer for Driver Software and follow the prompted steps.

Please post back with the result for further assistance

 

ts 2015 NOT WORKING

Hi Jeff,

Please share this information to assist you better.

• What does ts 2015 exactly refers to?
• What is the exact issue you are facing?
• Do you receive any error message or code?

We suggest you to be more specific and precise about the issue you are facing to understand the issue better.

Your reply is very important to ensure a proper resolution. Please get back to us with the above information to assist you accordingly.

 

RPi2 from Windows cross compilation Error "The test for linking against libxcb failed!"

Error in Cross Compilation, I am using Qt5.0, Windows10, Raspberry Pi 2.
I was following this tutorial and the process failed at step 16 and tried with its suggestion but cannot find a solution.

Error prompted after step 16 is:

Running configuration tests...
The test for linking against libxcb failed!
Use of pkg-config is not enabled, maybe you want to pass -force-pkg-config?
You might need to install dependency packages for libxcb.
See src/plugins/platforms/xcb/README.

and when I printed log in file as tutorial suggested, there are some errors mentioned like:

• cc1plus.exe: error: unrecognized command line option '-fuse-ld=gold'
  
• error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
  
• etc.
  

I tried but still find no solution.