Windows 10: The instruction at 0x00007Ffcec3e266e

Hi, I just turned on my computer, and at first it worked normally and that werFault.exe window popped out saying The instruction at 0x00007Ffcec3e266e referenced memory at 0x00007FFCDCFC87C. The memory could not be read I restarted it and the screen started flickering, I waited for awhile and it stopped flickering and I logged in but the same window popped out, but this time with a black screen. Before it popped out again ,another window popped out saying Your session was logged off because DWM crashed What’s exactly the problem and how to solve it ? Thanks.

:)

 

Instructions to change board?

Boot off of the windows CD, repair your XP partition (hopefully you won't have to reinstall windows), install drivers, and you're good to go. You'll see dual channel mode in the BIOS splash screen results from POST. It'll be pretty obvious *Stick Out Tongue . Here's a list of general tweaks for the 939Dual-SATA2.
Step one- Set time, date
Step two- In CPU settings, disable cool n quiet, set memory clock to DDR400, play with memory timings (CAS-TRAS-TRP-TRCD), which are listed in the bios in the order CAS, TRCD, TRAS, and TRP. EDIT- new BIOS's mess around with this order, can't be too sure on it, but yeah at least you know what the RAM timings stand for *Big Grin .
Leave MA timing at 2T unless you think your system can handle 1T
Step three- in Chipset settings, enable onboard LAN, disable onboard Audio, disable AGP fast write, set primary graphics adapter, and set CPU-NB and NB-SB link speed to 1000mhz.
Step four- in IDE, disable controllers you aren't using. On all drives detected, enable SMART if you can and set PIO/DMA as high as they will go.
Step five- Enable legacy USB support
Step six- Set password if you're worried about anyone screwing around with your BIOS settings
Step seven- Configure your boot sequence. I reccomend hard drive first, optical drive second, and floppy drive third.
Step eight- Save changes, boot into XP, and enjoy your computer.

 

Random Restars - > Video Card - > PSU

i try but find no info. itd help if someone explained it.. tbh.

 

Random Restars - > Video Card - > PSU

Yep Frogger's dead on. Do some more research, find some instructions, they will list it step-by-step. Print or write down what instructions you'll need. I hope it works for ya!