Windows 10: The problem I have is when I try to boot windows 11 I can't find any disk in the options.

I want to go back to windows 11 from Linux, I'm using debian as my distro. The problem I have is when I try to boot windows 11 I can't find any disk in the options : https://imgur.com/zlT0EOzI have an unused NTFS partition on my disk. However, when I run diskpart on a terminal while installing Windows 11 and type the command ‘list disk’, the only disk that is showing is my USB bootable device.Here is my disk in GParted:https://imgur.com/WUbWPfC This is my system:https://imgur.com/rFo95wsI created the windows 11 USB bootable device on a windows machine using rufus.

:)

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.

 

Windows 10 1709 System Restore problems...

That seems to be an attempt at Option 2 in the tutorial, which requires you to
a. Boot to a command prompt (Did you?)
b. You then seem to be mixing steps 3,4 and 5, thus your command is incorrect.

I suggest Option 1 is easier.

If you still have problems, please repost listing each specific step and saying which option from the tutorial you are using. Thanks.

 

BSOD - Inaccessible Boot Device

The reset save files equivalent if successful should be the quickest method to get you backup and running.

The backup files then clean install is the best option as you fix many problems and start fresh.

The command prompt commands are all trial and error.

Code:

Code:

Code:

Code:

Code:

Code:

Code: