Windows 10: The problem with the ram stick solve i think

The spark go away but I think it were from the video output to cable now I try the same and both the sticks of ram and I see it won't give any address errors it should be fine to let them stay inside them both of them when I'm running windows because the last day was I had to pull up one of the stick Because it will get blue screen of death.As i mentioned yesterday i had problems with one of them and a bsod boot loop . Now both of them work i thing

:)

 

RAM problems

Ok solved the boot problem and so far the RAM is working on the third and fourth slots but its only been 10 - 15 minute so hope it will work *Big Grin cheers for all the suggestions and your time.

 

Bad ram?

Seems you are using differnt sticks, of differnt types? This rarely works well.

Test each stick by themselves, as suggested, but i do not think that wil fix the issue. try using jsut hte same type of sticks only, perhaps that will solve all the problems.


Ram incompatibility issues typically behave like this, not showing problems for a bit after install, but errors appear a short while after.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.