Windows 10: The TPM 2.0 CONFLICT - ASROCK - Z170 Pro4S P2.70 . Windows 10 Pro

Hello,How can I resolve the conflict in the device manageron TPM 2.0, given that I kind of tried alltips on the internet.As you can see the Z170 Pro4S P2.70 motherboard supports TMP.Thank you .

:)

 

Switching Asrock motherboards from p67 Extreme4 Gen3 to Z170 PRO4

I am building a new system and I want to reuse my crucial 256GB hard drive and. I got a seagate hybrid drive and a spinpoint hard drive too.

Should I do a fresh install? Is there a utility to transition?

Can I swap my motherboard from a

From:

i5 2500k 3.3 GHZ LGA 1155

DDR3 213 G. Skil Ripjaws X 4x4GB

Samsung SH-S223C 24X DVD Burner

Asrock p67 Extreme4 Gen3 motherboard.

Windows 10 64 bit Pro

Radeon R9 290

Corsair TX 650 650 watt Power Supply

Antec 600 Case

To:

i5 6600k 3.5ghz LGA 1151

Asrock Z170 PRO4 motherboard

ASUS BC-210 Blu ray Burner

G. skill Ripjaws V Series V 4x4GB 288 pin DDR4 2666 SDRAM

Windows 10 64 bit PRO

Radeon R9 290

Rosewill ARC 650 Watt power supply

Antec GX 500 Case

I do not want to reinstall all my programs and my desktop.

 

No 5.1 sound (asrock b85m pro4 or audigy 2 zs)

Hi,

Thank you for posting your query in Microsoft Community.

I can understand how frustrating it could be when things go unusual. I will certainly help you.

To guide you in right direction we want to know:

• What is the make and model of your computer?
• Have you tried to unplug and plug in to other port?

I suggest you to follow the methods below and check if this helps:

Method 1: Uninstall and re-install the drivers.

Step 1: I suggest you to uninstall the Audio drivers and then install them.

Follow these steps to uninstall the Audio drivers.

• Press Windows key + X and select
  Device Manager.
• Search for Audio Device and expand it.
• Right click on the driver and select Uninstall.

Step 2: I suggest you to install the Audio drivers, go to the manufacturer’s website to download the audio drivers for your laptop and then install them.

Method 2: You can try installing the drivers in compatibility mode and check if it helps:

• Press the ‘Windows key on the keyboard.
• Type compatibility in the search box and then press
  enter.
• Click “Run programs made for previous versions of Windows” option from the list appeared in the left side.
• Select the drivers and install.

Also refer: How to: Install and Update drivers in Windows 10

How to: Install and Update Hardware Drivers in Windows 10

Hope this information is helpful. Do let us know if you need any further assistance, we'll be glad to assist you.

 

Need help/2 950 Pro NVMe in RAID 0/Asus Z170-A


Hi, after some struggling I was able to clone (using Samsung Cloning Tool) my original Windows 8.1x64 from a Samsung 830 SSD to the Samsung 950 Pro in the Z170-A
onboard M.2 slot and boot Windows 8.1x64 from it.
Then I added a 2nd 950Pro mounted on a PCIe card to the 3rd PCIe slot and was able to successfully build a RAID 0 array in the BIOS using the EZtool.
The problem is that I was unable to see the RAID0 array in the bootable devices list, so when I try cloning or restoring the image with a 3rd party tool (Acronis True Image),
the restoring software reports that there's no disk detected (it does not see the RAID 0 array).
I'd appreciate any help on how to do this successfully.