Windows 10: This Question Is related to my Windows USB Driver Please give me best solution. I will be...

Windows has stopped this device because it has reported problems. Code 43



A request for the USB device descriptor failed.



Device Type: Universal Serial Bus Controller

Manufacturer: Standard USB Host Controller

Location: Port_#0005.Hub_#0001





Unknown USB Device Device Descriptor Request Failed

Driver Provider: Microsoft

Driver Date: 21-Jun-06

Driver Version: 10.0.19041.488

Digital Signer: Microsoft Windows




Every time when I put my mouse/USB/flash in USB Port This error becomes shown. I do all the Youtube tutorials and google browsing.

Please give me the best solution.

Thank You So Much In Advance

:)

 

Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

DTS supported natively by Windows 8/8.1 and it should work on windows 10 too just DDL require to unlock your driver .

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows 10 USB ports

Hi Arnold,



Have you updated the drivers for all the devices?



I would suggest you to disable and re-enable the USB controllers. The following steps will uninstall all the USB controllers and then re-install them:

• Right click on Start, and then click Run.
  
• Type “devmgmt.msc” without quotes, and then click
  OK. Device Manager opens.
• Expand Universal Serial Bus controllers.
  
  Note: You might have to scroll down the list to find this item.
  
• Right click the first USB controller under Universal Serial Bus controllers, and then click
  Uninstall to remove it.
• Repeat step 4 for each USB controller that is listed under
  Universal Serial Bus controllers.

Note: Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.



I would also suggest you to manually download and install the drivers and check if it helps.



Hope it helps. If you have any further issues on the computer, please post your question related to Windows and we will be happy to help you.