Windows 10: Thunderbolt 3 port cannot recognize USB Drive

hello all,I spotted this issue around 1.5 month ago when my Thunderbolt 3 port could not recognize the mobile SSD drive a nvme SSD driver normally C to C cable. Problem:The system can read the drive normally if the device is plugged in BEFORE the laptop is turned on. But the laptop will not detect the mobile drive if I plug it in AFTER the system is on. The problem suddenly occurred after a Windows update I cannot recall which version.Laptop InfoHP OMEN Laptop 15-dc0009tx purchased in 2018IntelR CoreTM i5-8300H RAM 16.0 GBWindows 11 Pro 23H2OS build 22631.2715Thunderbolt InfoWhen t

:)

 

Samsung T5 is not getting recognized in a non Thunderbolt 3 USB C Port

I got a T5 SSD, it works really well with standard USB 3.1 Type A port but its not getting recognized with Type C port on my Laptop. My laptop doesn't support Thunderbolt 3. Any suggestions. I use a
Zephyrus M GU502GU.

 

thunderbolt 3 to displayport adapter

Hi John,



Thank you for writing to Microsoft Community Forums.



I understand that inconvenience you are facing when the things may not work as expected.

1. What is the make and model of the computer?
   
   
   

When the Thunderbolt 3 is used with certain eighth generation Intel processor-based Windows 10 systems, there is a possibility that the two USB 3.0 ports on the back of the dock (closest to the Ethernet port)
may not be recognized properly by the operating system.





However, I would suggest you to follow the steps mentioned below and let us know if that helps.

1. Disconnect the pluggable Thunderbolt 3 dock from the system and remove its power cable to turn off completely.
   
2. Uninstall the Intel ‘Thunderbolt Software’ present on your system via the Control Panel ->
   Programs and Features and restart the device once.
   
3. Download and install the latest version of the Intel Thunderbolt Software published by your system manufacturer. If you are unable to obtain this download from your system manufacturer, you can download a version directly from Intel
   here -> https://downloadcenter.intel.com/do...-Driver-for-Intel-NUC-Kit-NUC8i7HNK-NUC8i7HVK
   
4. Restart the system once again.
   
5. Reconnect the power cable to the pluggable Thunderbolt 3 dock, and then reconnect the Thunderbolt 3 cable from the dock to your system.
   
6. You should be prompted to authenticate/approve the dock. Follow the onscreen prompts for the completion of the process and check the status of the issue.
   

If the issue still persists I suggest you to get in touch with the
Thunderbolt support for the further assistance.





Hope it helps.



Muralidhar

Microsoft Community Moderator

 

Thunderbolt 3 USB Devices, Device Mgr and Thunderbolt Drivers

One topic that may be helpful to thunderbolt 3 users on Win 10. For various reasons you can have thunderbolt 3 usb - c port hardware installed on your win 10 box and may not see thunderbolt 3 drivers present in the device mgr. One reason for this is
the thunderbolt drivers are not installed. If the hardware is recognized by the bios and the thunderbolt driver is not installed you should see a device called the base system device. Installing the correct thunderbolt driver will then replace the base system
device with the thunderbolt controller device.