Windows 10: Thunderbolt issue

On the Thunderbolt software, it only says Port 1. It usually says:Now it says:What's wrong? Is it the Thunderbolt 4 Cable that's broken? The Thunderbolt 3 port that's broken? Or is it the PSU or GPU that's broken? The GPU fans are still spinning

:)

 

thunderbolt 3 to displayport adapter

Hi John,



Thank you for writing to Microsoft Community Forums.



I understand that inconvenience you are facing when the things may not work as expected.

1. What is the make and model of the computer?
   
   
   

When the Thunderbolt 3 is used with certain eighth generation Intel processor-based Windows 10 systems, there is a possibility that the two USB 3.0 ports on the back of the dock (closest to the Ethernet port)
may not be recognized properly by the operating system.





However, I would suggest you to follow the steps mentioned below and let us know if that helps.

1. Disconnect the pluggable Thunderbolt 3 dock from the system and remove its power cable to turn off completely.
   
2. Uninstall the Intel ‘Thunderbolt Software’ present on your system via the Control Panel ->
   Programs and Features and restart the device once.
   
3. Download and install the latest version of the Intel Thunderbolt Software published by your system manufacturer. If you are unable to obtain this download from your system manufacturer, you can download a version directly from Intel
   here -> https://downloadcenter.intel.com/do...-Driver-for-Intel-NUC-Kit-NUC8i7HNK-NUC8i7HVK
   
4. Restart the system once again.
   
5. Reconnect the power cable to the pluggable Thunderbolt 3 dock, and then reconnect the Thunderbolt 3 cable from the dock to your system.
   
6. You should be prompted to authenticate/approve the dock. Follow the onscreen prompts for the completion of the process and check the status of the issue.
   

If the issue still persists I suggest you to get in touch with the
Thunderbolt support for the further assistance.





Hope it helps.



Muralidhar

Microsoft Community Moderator

 

Windows 10 Pro Workstation Thunderbolt 2

I used all of your suggestions. According to system file checker -- there is nothing damaged or missing. I also uninstall the Thunderbolt software and reinstall it. That did not work. What would be the next steps to resolve this issue? Contacting a Microsoft
support engineer? Contacting Dell Pro-Support? What are your suggestions?

Here is the link to the Thunderbolt driver:

http://www.dell.com/support/home/us...de=precision-t7810-workstation&driverId=MYDH5

I appreciate your support Mr. Mon.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.