Windows 10: Told to do clean install, have more errors than before in event viewer

I was told to do a clean install of windows 10 because of less problems, well I have more errors and warnings in the event viewer than I did before. Here are some of the errors, can someone explain why I'm getting them, just started today and I haven't installed anything.

The Sync Host_39c26 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.

:)

 

HomeGroupListener Service Terminated

The reg hack is useless. The parameters are not recognized and produces more errors in event viewer than before:

The HomeGroup Listener service depends on the following service: RPCSS RpcEptMapper MpsSvc HomeGroupProvider. This service might not be installed.

This error is repeated many times at boot up. The indicated services are installed and functioning properly. Creators update here.

 

Event viewer is overflowing with more errors in Windows 10

Hi,

We are really sorry for the inconvenience caused.

I suggest you to try the below methods and check if that helps:

Method 1. Run Performance and maintenance troubleshooter.
Follow the steps.

1. Go to Control Panel. In the search box, type troubleshooting, and then click on Troubleshooting.

2. Under System and Security, click on System Maintenance then run it.

For reference, refer to the link to improve computer’s performance:

“Ways to improve your PC's performance”

http://windows.microsoft.com/en-us/windows-8/improve-pc-performance#section_1
Note : It is also applicable for windows 10 as well.

Method 2: Security scan.

If you notice performance related issues or if programs takes time to load, there are chances that some security threats got installed in the computer without your knowledge. To make sure that the issue is not caused due to any security threats like virus
or malware, I would suggest you to perform a complete security scan. Make sure that the antivirus software is updated with the recent virus signatures before you run a security scan.



You can also download and run the Microsoft Security Scanner from here:

http://safety.live.com



Note: The Microsoft Safety Scanner expires 10 days after being downloaded. The Microsoft Safety Scanner is not a replacement for using an antivirus software program that provides ongoing protection. Any data files that are infected may only
be cleaned by deleting the file entirely, which means there is a potential for data loss.

For the issue regarding slow Internet connection, refer the below article and check if that helps:

Fix network connection issues:

https://support.microsoft.com/en-us/help/10741/windows-10-fix-network-connection-issues

If the issue remains unresolved, please get back to us and we would be happy to help.

 

I have a double-boot with 2 ssd's. One ssd with W10 Pro, installed over W7. On the other, I recently installed a clean W10 Pro.
I do not see much difference in performance. Both systems work without problems, apart from one issue. W10 over W7 had difficulties with restore points and Windows backup images. Therefore I switched over to Macrium Reflect free.
What do I see as possible advantage of a clean install?
- it forces you to rethink what programmes do you really need. I have now less programmes installed.
- it forces you to rethink and recheck the settings in these programmes.
- the size of my registry reduced from 355 Mb to 250 Mb. No registry cleaner is able to do that.
- I have now made system images from the beginning. A library of images to fall back in future if needed.
But to finalize: no real improvement of performance and the same amount of errors in error log after boot: 1 errors/7 warnings instead of 2 errors/5 warnings.

 

I have never understand obsession with meaningless errors (I have the same one), but there are solutions:

https://answers.microsoft.com/en-us/...a11c81e?auth=1

I do not have this one, but try uninstalling Microsoft Link-Layer Discovery Protocols from network adapter.

 

ok I uninstalled those 2 you said so I will see if that works. I also have these errors:
Access to drivers on Windows Update was blocked by policy



Crawl could not be completed on content source <iehistory://{S-1-5-21-850104054-2949014279-3855084104-1001}/>.
　
Context: Application, SystemIndex Catalog
　
Details:
The system cannot find the file specified. (HRESULT : 0x80070002) (0x80070002)

 

Based on this try to run CMD as admin and copy/paste:

reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Device Metadata" /v "PreventDeviceMetadataFromNetwork" /t REG_DWORD /d "0" /f
reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\DriverSearching" /v "SearchOrderConfig" /t REG_DWORD /d "1" /f

 

says it was successful so we will see........thanks. I'll probably have more for you to check on

 

Ok, so far so good with the previous errors. Now, I have these:

This could be related to a problem in the TCP global or supplemental configuration and will cause degraded throughput.
　
: The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS. I have the latest BIOS update
　
Name resolution for the name wpad timed out after none of the configured DNS servers responded.

 

This 'error' could be because automatic driver updates have been turned off?

 

It could have been, but there is also 80070002, which would require more steps, like SFC scan and cleanup of WU service.

For starters make sure, you have an updated network driver, then try to change DNS servers.

How to Switch to OpenDNS or Google DNS to Speed Up Web Browsing

 

no I have them set to automatic

 

I done this and so far so good. I did have updated NIC drivers and changed to Google DNS

 

I just saw about 15-18 errors on this same thing

The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.