Windows 10: Toolwiz setting registers remotely Win 10.

I'm trying to turning off and on the protection of Toolwiz remotely by setting the appropriate values to the registers:
HKEY_CURRENT_USER\Software\Toolwiz\TimefreezeNew
CURRENT_PROTECT_MODE REG_DWORD 0x0
NEXT_BOOT_PROTECT REG_DWORD 0x1
I succeed to set and read the register remotely but unexpectedly the values of the register at the remote machine were different.
I set other register remotely but in this case all was OK.
I used python and psexec to run the commands.
Following are the commands:
A = 'psexec -s \\\\'
A1 = 'psexec \\\\'
B = ' -u admin -p football'
REG_QUERY= ' reg query '
REG_ADD = ' reg add '
REG_CURRENT_PROTECT_MODE_SET =' /v CURRENT_PROTECT_MODE /t REG_DWORD /d 0'
REG_NEXT_BOOT_PROTECT_SET = ' /v NEXT_BOOT_PROTECT /t REG_DWORD /d 1'
TOOLWIZ_REGISTER = ' HKEY_CURRENT_USER\\Software\\Toolwiz\\TimefreezeNew '
>>> os.system A + laptop + B + REG_ADD + TOOLWIZ_REGISTER + REG_CURRENT_PROTECT_MODE_SET

PsExec v2.2 - Execute processes remotely
Copyright C 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com


Value CURRENT_PROTECT_MODE exists, overwriteYes/No? y
The operation completed successfully.
reg exited on HAGALA-10-2 with error code 0.
0
>>> os.system A + laptop + B + REG_QUERY + TOOLWIZ_REGISTER

PsExec v2.2 - Execute processes remotely
Copyright C 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com



HKEY_CURRENT_USER\Software\Toolwiz\TimefreezeNew
CURRENT_PROTECT_MODE REG_DWORD 0x0
NEXT_BOOT_PROTECT REG_DWORD 0x1

reg exited on HAGALA-10-2 with error code 0.
0
The registers at the remote machine were 1,1 and didn't change.

I used another register to check the process.

>>> os.system A + laptop + B + REG_QUERY + CHECK_REGISTER

PsExec v2.2 - Execute processes remotely
Copyright C 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com



HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NativeWifiP\Parameters
DefaultFilterSettings REG_DWORD 0x1
EnableWoWLAN REG_DWORD 0x1
>>> REG_EnableWoWLAN_SET = ' /v EnableWoWLAN /t REG_DWORD /d 55 /f'
>>> os.system A + laptop + B + REG_ADD + CHECK_REGISTER + REG_EnableWoWLAN_SET

PsExec v2.2 - Execute processes remotely
Copyright C 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com


The operation completed successfully.
reg exited on HAGALA-10-2 with error code 0.
0
>>> os.system A + laptop + B + REG_QUERY + CHECK_REGISTER

PsExec v2.2 - Execute processes remotely
Copyright C 2001-2016 Mark Russinovich
Sysinternals - www.sysinternals.com



HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NativeWifiP\Parameters
DefaultFilterSettings REG_DWORD 0x1
EnableWoWLAN REG_DWORD 0x37


I checked the value of the register at the remote machine and was 0x37.

I would appreciate if someone can help me to overcome this issue

:)