Windows 10: Touchscreen calibration fail randomly

Hello,I have a problem on multiple machine with multiple touchscreen monitors. They keep losing their touchscreen calibration. Touch is working but the input is sent to the wrong monitor. When I kill dwm.exe, the calibration come back correctly.What can be causing this ? How to fix it? PC is up to dateGPU drivers are up to dateWe tried reinstalling Windows alreadyThank you,Phil

:)

 

Touchscreen Calibration

When updated to Windows 10 Pro, we can no longer calibrate our touchscreen. The touchscreen works, it just doesn't click what we want it to.

 

Touchscreen driver

To assist you further regarding your concern, we' d like to know which version of Windows are you using? On the other hand, you may uninstall and reinstall the touchscreen driver on your device. To do this, follow these steps:

• Click Start, type Device Manager and press
  Enter.
  
  
• Expand the Human Interface Devices section, right-click on
  HID-compliant touch screen.
• On the Driver tab, select Uninstall and click
  OK.
• Restarting your device may download and reinstall the touchscreen driver automatically if you're computer is connected to the Internet. However, we suggest that you visit the manufacturer's website of your device to get the latest touchscreen driver.
  

Note: There may be more than one HID-compliant touch screen
listed. If so, complete steps 2, 3 and 4 for each one. It is also recommended that you install every updates available for your device.


Once you're done, you may adjust the accuracy of the screen senses by calibrating it through the settings. To do this, you may follow the steps below:

• Click Start, type Calibrate the screen for pen or touch input
  and press Enter.
• Click Calibrate on the Display tab and follow the on-screen instructions, click
  Save to save the calibration.
• Once you're done, click OK and check if the issue persists.

Keep us updated about your concern for additional assistance.

 

Windows touchscreen calibration for multi screen setup

Hello

I have a multi screen / display setup. On display output 3 I connected a touchscreen.

In windows 7 I was able to calibrate the screen on display output 3 using the winodows touchscreen calibration tool.

When I did the calibration I was prompted to do the calibration, press ESC to abort or press ENTER to change to the next screen for calibration.

Now we changed to windows 10.

In the current touchscreen calibraton tool there is no message or function to press ENTER to say the calibration tool to go forward to the next display output for calibration.

I just can do the calibration, when I configure the touchscreen display to be the primary display output. (The touchscreen does not have to be output number one for calibration).

But as soon as I configure another display output to be the primary, the touch input functionality moves always to the primary display.

Is there any way to start the calibration tool on a specific display output or any other idea?

Or is there a way to start the calibration tool over a specific command over the cmd window?

Update:

When I start the calibration utility with the following command, the "calibration screen" starts on the right display output. However, when I touch on the touchscreen, I see that the input is "showed" on display1 instead of display 3...