Windows 10: Triple monitor setup, monitor going on and off when a new screen is being detected the...

Discus and support Triple monitor setup, monitor going on and off when a new screen is being detected the... in Windows 10 Software and Apps to solve the problem; HiI have a triple monitor setup. All are using the same native resolution 2560x1440 , one is 240Hz the main while the other 2 are 60Hz.I do have 2... Discussion in 'Windows 10 Software and Apps' started by Levriette, Aug 29, 2022.

  1. Levriette Win User

    Triple monitor setup, monitor going on and off when a new screen is being detected the...


    HiI have a triple monitor setup. All are using the same native resolution 2560x1440 , one is 240Hz the main while the other 2 are 60Hz.I do have 2 computers plugged into these 3 screens and I use to start my Win 11 computer with only 1 or 2 monitors, and then the third will be turned on post launch.Since I started with Windows 11 in December 2021, I noticed that every time I'll turn on one of my 3 monitors for the first time after the Pc starts all the monitor will turn on and off for like 30 sec and then stabilize. It does not re do it if I turn on and off the monitor myself but it does

    :)
     
    Levriette, Aug 29, 2022
    #1

  2. "monitor off" detection moving windows to turned off monitors

    I have been pulling my hair out for months with my Triple 4K setup because every time the computer goes to sleep, the monitors get screwed up. I finally found a program that allows you to manually override EDID info for your displays and force your desired
    resolution so the screens will always be setup correctly when you turn on the computer. The program is also free.

    Check out Custom Resolution Utility

    Custom Resolution Utility (CRU)

    Once you run it:

    • Disable all of the default "Established Resolutions"
    • Delete all of the default "Detailed Resolutions"
    • Delete all of the default "Standard Resolutions"
    • Add a new "Detailed Resolution"
    • Under new "Detailed Resolution" I left all of the settings the same except for the active horizontal and vertical pixel dimensions, which is obviously where you set your desired screen resolution.
    • Then repeat steps 1-5 for each monitor.
    • Once all monitors are configured properly, close CRU and run the restart.exe or restart64.exe included with CRU and you should be good to go!

    I hope this helps other folks who are having similar issues to me with Windows 10 monitor auto detection and displayport connections.
     
    RagingNomad, Aug 29, 2022
    #2
  3. Windows Does Not Detect Triple Monitors But Nvidia Does?

    Hello I want to change my resolution back to 1920 x 1080 for each monitor instead of 5760 x 1080 for all three combined. I want to play my fps game with just one monitor and have the two monitors on the side usable and not just black screens. so for example I could use one of the spare monitors to stream or have a web browser open, but windows does not recognize my 3 monitors it thinks all three are just one 5760 x 1080, the nvidia control panel detects my screen as separate but I'm not sure what to do here. I knew I should've downloaded that program that allows me to change resolutions back when following a guide for triple monitor setup for msfs 2020... help, why doesn't windows detect my monitors as separate even when i revert the nvidia settings.
     
    RealFMoney, Aug 29, 2022
    #3
  4. Triple monitor setup, monitor going on and off when a new screen is being detected the...

    Windows Does Not Detect Triple Monitors But Nvidia Does?

    Hi RealFM. I'm Greg, 10 years awarded Windows MVP, specializing in Installation, Performance, Troubleshooting and Activation, here to help you.

    Try these methods to setup and troubleshoot three monitors - fixes are the same for WIndows 10 and 11:

    https://www.lifewire.com/connect-3-monitors-to-...

    https://www.techwalla.com/articles/hook-up-moni...

    https://www.cnet.com/forums/discussions/windows...

    https://www.addictivetips.com/windows-tips/diff...

    https://www.howtogeek.com/304036/how-to-adjust-...

    https://community.spiceworks.com/topic/2228482-...

    https://windowsreport.com/third-monitor-not-det...

    (Avoid ad links which intrude into editorial copy, especially avoid Restoro, PC Repair Tool and Reimage ads)

    https://www.gadgetreview.com/third-monitor-not-...

    https://www.drivereasy.com/knowledge/set-up-a-t...

    https://silicophilic.com/third-monitor-not-dete...

    https://appuals.com/fix-third-monitor-not-detec...

    (Avoid ad links which intrude into editorial copy, especially avoid Restoro, PC Repair Tool and Reimage ads)



    Feel free to ask back any questions. Based on the results you post back I may have other suggestions if necessary.

    ______________________________________________

    Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.
     
    Greg Carmack - Windows MVP 2010-2020, Aug 29, 2022
    #4
Thema:

Triple monitor setup, monitor going on and off when a new screen is being detected the...

Loading...
  1. Triple monitor setup, monitor going on and off when a new screen is being detected the... - Similar Threads - Triple monitor setup

  2. Triple Monitor Setup No Signal

    in Windows 10 Gaming
    Triple Monitor Setup No Signal: I have a triple monitor setup, but only 2 out of the 3 monitors are on simultaneously. Whenever I plug in the third monitor another one shuts off and gets the no signal detected message. If i unplug one the other one starts working fine, two out of three stay on, but whenever...
  3. Triple Monitor Setup No Signal

    in Windows 10 Software and Apps
    Triple Monitor Setup No Signal: I have a triple monitor setup, but only 2 out of the 3 monitors are on simultaneously. Whenever I plug in the third monitor another one shuts off and gets the no signal detected message. If i unplug one the other one starts working fine, two out of three stay on, but whenever...
  4. Monitor not being detected.

    in Windows 10 Software and Apps
    Monitor not being detected.: Hi, my monitor isn't being detected. I have tried:RestartingChecking all cables are secure and connected in the right placeTried HDMI-2 instead of HDMI-1.Uninstalling and re-installing my graphics driversUninstalling and re-installing device via Device ManagerI currently do...
  5. Triple monitor setup, monitor going on and off when a new screen is being detected the...

    in Windows 10 Gaming
    Triple monitor setup, monitor going on and off when a new screen is being detected the...: HiI have a triple monitor setup. All are using the same native resolution 2560x1440 , one is 240Hz the main while the other 2 are 60Hz.I do have 2 computers plugged into these 3 screens and I use to start my Win 11 computer with only 1 or 2 monitors, and then the third will...
  6. Windows blue screen crashing on triple monitor setup.

    in Windows 10 BSOD Crashes and Debugging
    Windows blue screen crashing on triple monitor setup.: I use an MSI gaming laptop and have two monitors connected to it. One via hdmi and the other via displayport mini. I have been using this setup for many months but recently my windows keeps on crashing with a bluescreen error. The crash only happens when I "click" focus on...
  7. Triple monitor setup

    in Windows 10 Ask Insider
    Triple monitor setup: So I am using a triple monitor setup using the serial port on my motherboard, the serial on the graphics card, and the hdmi on the graphics card, but the instant I try to use the on board serial I cannot put my pc into sleep mode, and I am now confused. Thanks in advance...
  8. Screens flicker when one monitor is off in 4 MONITOR SETUP

    in Windows 10 Customization
    Screens flicker when one monitor is off in 4 MONITOR SETUP: Hello, everyone. I'm a video production engineer and have a 4 monitor setup (Windows 10, up to date) in this arrangement: 4K (TV) 1440p - 4K - 1440p All displays work great, but once the monitors go to sleep, the top 4K monitor (which is a Phillips TV)...
  9. Triple monitor setup. Problem with the 2 outer monitors

    in Windows 10 Customization
    Triple monitor setup. Problem with the 2 outer monitors: Yes, hello my name is Andreas and i just got my 3rd monitor for my setup. However now i have a rescaling/resizing problem with my 2 outer monitors. Whenever i drag an app onto one of the 2 outer monitors, the app decides to rescale to fit the whole screen without my doing....
  10. Macro/hotkey dual monitor to triple (duplicate) monitor setup

    in Windows 10 Support
    Macro/hotkey dual monitor to triple (duplicate) monitor setup: Hi, I am using windows 10 pro with 3 monitors attached to a GTX770. 2xDell U2715H monitors (1440p) - work monitors 1xPhilips 1080p monitor - client monitor. Two monitors are used all the time for work in a dual monitor setup. The third monitor is placed away from me...