Windows 10: TROUBLE WITH MY LOCAL DISC

I'm trying to use my cd as a flash drive . following the steps given to format but i get a response that " windows cannot be able to complete the format

:)

 

Disc for windows 7 to run on windows 10

Hi Jane,

Thank you for contacting Microsoft community.

I suggest you to follow the below steps to read the Windows 7 disc and check if it helps.

• Insert Windows 7 disc.
• Press “Windows+E” which will open file explorer.
• There you will find the Windows 7 disc.
• Open the disc and copy the files anywhere on your computer, so that you can access the information from the disc.

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.

 

Local account installation question

I'm fairly certain that Skip this step was available in 10.0.130 - the workaround in Step 20 (back button) is no longer required.

The currently known, as of 10.0.130, ways to create a Local account sign-in are

• Skip this step at the MS account creation phase
• No Internet connection during the install
• static IP (post# 2 by Fragment) - New (to me anyway)

 

trouble burning cd in windows media player

What is the Make & Model # of the computer, and CD/DVD-RW drive? What brand of blank CD-R are you using? Or are you using an RW disc? As stated, RW discs take extra steps to use and not recommended for Audio CD's. Not every brand of disc works with every brand of drive. As stated, use only Name Brand Blank CD-R's You can update the Firmware for the burner drive from the manufacture to allow it to support different brands of Blanks. Verify in the Burning App that the Recorder is supported and lists the drive in the app as the recorder. With a blank CD-R disc in, open a burning program like CD BurnerXP, or any other burning app Go to the top toolbar to Recorder, confirm the Drive is listed which means that drive is supported. If so, then go to Disc/Disc Information on the Toolbar to make sure this disc is showing as Blank and ready to be burned. Remember if you have a failed burn on a disc, throw it away, it cannot be used again, unless it is an RW disc We don't suggest it for burning CD's but if you are more comfortable with WiMP then follow these steps to Enable it https://support.microsoft.com/en-au/...3-94596b658287 Or reinstall it https://support.microsoft.com/en-us/...3-1d8ec121b5b8