Windows 10: Troubles with Installation of IDE-HDD

Discus and support Troubles with Installation of IDE-HDD in Windows 10 Drivers and Hardware to solve the problem; Hallo, having troubles to installate an IDE-HDD ! If - Win 10 won't start again ??? I found IDE-Device absolute correct in Bios, but won't start... Discussion in 'Windows 10 Drivers and Hardware' started by goasbeidlbua, Feb 22, 2016.

  1. Troubles with Installation of IDE-HDD


    Hallo,

    having troubles to installate an IDE-HDD !
    If - Win 10 won't start again ???
    I found IDE-Device absolute correct in Bios, but won't start again.
    Getting following message !
    "there is a Problem . . . Inaccessible_Boot_Device . ." and then the
    cpu starts again.
    After it could be, that following messege comes
    The PC could not start correctly . . . .
    "der PC konnte nicht ordnungsgemäß gestartet werden 0xc000000f"

    Well install actual Vers of Bios - but same problems

    Having following config

    G41M-ES2l F9 (F9 => aktuellste Bios-Vers)
    Win 10 Pro
    Vers 1511
    OS-Build 10586.104
    Prozess Intel Cor Quad CPU Q6600 2,40 GHz

    Install actual Device-drivers and the system run very well,
    but if i insert a IDE-Device . . . . the written problems

    May you have good ideas . . . .
    Say thanks for answering.



    for your Info: i'm good expierienced in IT

    - - - - - - - - - -- - - - -- - - - -- - - - -- - - - -- - - - -- - - - -- - - - -
    Same in German
    - - - - - - - - - -- - - - -- - - - -- - - - -- - - - -- - - - -- - - - -- - - - -
    IDE-Laufwerks-Erweiterung klappt nicht !


    Hallo Leute,

    ein ganz seltsames Phänomen hab ich da - oder normal bei Win 10 ?

    Seit Tagen versuche ich eine zweite Festplatte (Datenplatte) in den Rechner zu bauen.
    Funktioniert auch gut.
    Einwandfrei im Bios erkennbar, jedoch . . . Win 10 startet mit Problemen . . .
    Das "trapezförmige Win mit den rotierenden Punken" unten kommt . . . dann
    "Es ist eine Problem aufgetreten . . . . Inaccessible_Boot_Device . . ." dann startet
    der Rechner neu.
    Bei einem weiteren Versuch den Rechner zu starten kann es sein, daß folgende
    Meldung kommt "der PC konnte nicht ordnungsgemäß gestartet werden 0xc000000f"

    Nach vielen Versuchen habe ich auch das Bios auf die aktuellste Version gebracht,
    aber auch das brachte nicht den gewünschten Erfolg.

    Ich habe da folgende Config
    G41M-ES2l F9 (F9 => aktuellste Bios-Vers)

    Win 10 Pro
    Vers 1511
    OS-Build 10586.104
    Prozess Intel Cor Quad CPU Q6600 2,40 GHz

    Konnte auch die aktuellsten Treiber für diesen Rechner anstandslos installieren
    und der Rechner läuft auch ganz flott.


    Ich freue mich auf gute Antworten.

    Vielen Dank da




    PS ich erlaube mir noch zu erwähnen, daß ich EDV-mäßig nicht unerfahren bin.

    :)
     
    goasbeidlbua, Feb 22, 2016
    #1

  2. Troubles with the installation of the updated Nokia Software Updater software

    Since yesterday I cannot use the Nokia Software Updater functionality because - when I start it - it carries me to the download of the latest version of this program. Problem is that - after the download iis finished -
    it is impossible to install it because I get the follwoing messages :



    1)


    Nokia Software Updater


    ! Error 1720. There is a problem with this Windows Installer package. A script required fir this install to complete could not be run. Contact your support personnel or package vendor. Custom action kill_process script error -2147217388, : Line 5,
    Column 1,




    2)

    ! Installation operation failed.
    Fatal error during installation.



    I tried to Uninstall Nokia Software Updater from my computer to try a brand new installment of it, BUT I could not Uninstall the program and got the same following computer message :



    Error 1720. There is a problem with this Windows Installer package. A script required for the install to complete could not be run. Contact your support personnel or package vendor. Custom action kill_process script error -2147217388, : Line5, Column 1,



    How can I solve the problem ???
     
    franco56---01, Feb 22, 2016
    #2
  3. unna---01 Win User
    Troubles with the installation of the updated Nokia Software Updater software

    Nokia Owners Club - Page 30 - ElaKiri Community



    I copy the relevant content, just in case:

    ----------------------------

    yo its updating...... if u have any problem installing the PC suite try this

    error: 'Error 1720. There is a problem with the windows installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process
    script error -2147023898,: line 5 column 1,.


    the very best solution:

    This is easy to get around. The error is only in Nokia's combined installer, not the NSU installer itself.

    1. Download and install 7-Zip. Don't worry it's free!

    (No, neither WinRAR nor WinZip will do for this)

    Get it here: Download

    2. Use 7-Zip to extract the contents of NokiaSoftwareUpdaterSetup_en.exe into a folder. You should now have a bunch of folders and a few files.

    3. Go into Packages, then NokiaSoftwareUpdater, then Setup

    4. Launch NokiaSoftwareUpdater.msi (double-click it).

    5. That's it!

    -------------------------------------
     
    unna---01, Feb 22, 2016
    #3
Thema:

Troubles with Installation of IDE-HDD

Loading...
  1. Troubles with Installation of IDE-HDD - Similar Threads - Troubles Installation IDE

  2. IDE to AHCI new install Help

    in Windows 10 Installation and Upgrade
    IDE to AHCI new install Help: I have a somewhat dated system with AMD. I finally decided to switch from a mechanical to a SSD870 EVO. I'm not totally "new" to computers, but there is quite a bit I'm not familiar with. I bought a SSD because I do quite a lot of gaming and what not. HDD seem to slow that...
  3. Trouble making a backup to an external HDD

    in Windows 10 Ask Insider
    Trouble making a backup to an external HDD: I'm making a backup of my files to an external HDD I bought recently. Both my SSD and HDD are the same size, but Windows is saying there's not enough space. And the space that's already being taken up is already larger than what's on my SSD. Any help?...
  4. Trouble installing

    in Windows 10 Ask Insider
    Trouble installing: So I am trying to install W10 and when I try to install it through a USB Drive, Windows doesn't detect my SSD. It tells me to insert drivers or something. What do I do? (I am running Ubuntu now and Linux seems to have no problems detecting the SSD drive, even Manjaro did)...
  5. Installation trouble!

    in Windows 10 Ask Insider
    Installation trouble!: ok, so, i started off with a locked 4th gen i5, b250 mobo from gigabyte, 16gb DDR4 ram, an RTX 2070, and two hard drives. decent for light gaming and photo editing. i needed some major upgrades as i have really dived deep into videography. i got a Ryzen 9 3900x, Asus TUF...
  6. AHCI and IDE

    in Windows 10 Drivers and Hardware
    AHCI and IDE: Hello, I'm going to put two SSD and one HDD into a desktop. They should arrive from NewEgg today. I know the SSD's need to be AHCI, but looking in the bios I see I can set SATA channels 1 - 4 as AHCI but still have the option of setting 5 & 6 as IDE. Is it best to put the...
  7. AHCI and IDE

    in Windows 10 Support
    AHCI and IDE: Hello, I'm going to put two SSD and one HDD into a desktop. They should arrive from NewEgg today. I know the SSD's need to be AHCI, but looking in the bios I see I can set SATA channels 1 - 4 as AHCI but still have the option of setting 5 & 6 as IDE. Is it best to put the...
  8. Convert IDE enclosure to take a sata 3.5 HDD.

    in Windows 10 Drivers and Hardware
    Convert IDE enclosure to take a sata 3.5 HDD.: Hi, Not sure that this is the correct thread for this question ..... but here goes. I have a 3.5inch Sata HDD which I would like to use, and assumed that I would require a Sata type enclosure in order to use it. I have an empty IDE enclosure and have heard it can be...
  9. Convert IDE enclosure to take a sata 3.5 HDD.

    in Windows 10 Support
    Convert IDE enclosure to take a sata 3.5 HDD.: Hi, Not sure that this is the correct thread for this question ..... but here goes. I have a 3.5inch Sata HDD which I would like to use, and assumed that I would require a Sata type enclosure in order to use it. I have an empty IDE enclosure and have heard it can be...
  10. trouble with install

    in Windows 10 Installation and Upgrade
    trouble with install: I have just got a computer with windows 10 on. I previously had all my CAD software on windows 7. I have had to upgrade as my old computer died. my problem is I have 1 possibly 2 programs that I cant even install from windows 8 and 10. I am not sure what options I have? the...