Windows 10: Troubleshooting hibernation issue: long time to power off

Hi.Whenever my PC is sent into hibernation, it normally takes few seconds. System drive is an SSD NVMe M.2, 16 GB RAM. But sometimes, it takes extraordinary much longer, e.g . 1-3 minutes without an obvious reason. That means, memory usage is low to average.I've used WPR to troubleshoot this issue using the "Hibernation/Resume" scenario. After opening the log file in WPA, it shows 1. activity, 2. "Trace off", 3. activity. That's how I expect it to be. The first part is only 6 seconds - but it did not power off after 6 seconds. It took additional 54 seconds. Why? How can I find it out if not

:)

 

Windows 10 Hibernate problems

I suggest you to follow the methods provided below and check if it helps.

I suggest you to run the Power troubleshooter by following the steps below and check if for any power components change status.

• Press Windows logo key on the keyboard, type troubleshooting and select the top most search result.
• Click on View All from the left side panel of the window.
• Select Power from the options, click on Advanced option and check Apply repairs automatically option.
• Follow the on screen instructions and wait for the troubleshooting to complete.
• Check for the missing/corrupted power component status of the troubleshooter, close the window and check if the issue is resolved.

You can follow the step by step guide to
enable hibernate option in windows 10.

 

Another power related issue (Hibernation error)

Hi Daniel,



Thank you for writing to Microsoft Community Forums.



I can understand the inconvenience you are experiencing and
I am going to do my best to make sure you receive all the help you need.



Provide us additional information to assist you better with this issue:

1. What is the make and model of the computer?
   
2. What is the specific error code/message you have received?
   
3. Which version of Windows is installed on your device?
   

Refer the article ‘Which version of Windows operating system am I running’
to provide the details.



I would suggest you to follow the methods mentioned below.



Method 1

Run the Power Troubleshooter

1. Open Settings > Update & Security > Troubleshoot.
   
2. Under Troubleshoot, select the
   Power option.
   
3. Click on Run the troubleshooter button.
   
4. Continue with the onscreen prompts and check the status of the issue.
   

Method 2

Disable Fast Startup

1. Open Control Panel > Hardware and Sound >
   Power Options.
   
2. On the left pane, click the Choose what the power buttons do link.
   
3. Click the Change settings that are currently unavailable link.
   
4. Under “Shutdown settings,” uncheck the Turn on fast startup option.
   
5. Click the Save Changes button.
   
6. Restart your computer and then try to Hibernate again.
   

Method 3

Reset power plan to default

1. Click on Start, type in cmd
   > Right click and ‘Run as administrator’.
   
2. Type the following command to reset your power plan and press
   Enter.
   
   powercfg –restoredefaultschemes
   
3. Restart the device and check the status of the issue.
   

Method 4

Disable and re-enable hibernation

Refer the article How to disable and re-enable
hibernation on a computer that is running Windows for the steps.





Regards,

Muralidhar

Microsoft Community Moderator

 

Issues with the Sleep mode and Hibernate in Windows 10

Hi,

Thank you for posting your query on Microsoft Community. Let me assist you.

I see that even if you are placing the PC in sleep mode or hibernate mode the PC will turn back On after some time. This might be due to the corruption in Power management settings.

I would suggest you to disconnect the TV from computer and check if the issue persists. If the issue does not persists then you can move further with the below troubleshooting steps.

I suggest you to try running the Power Troubleshooter to check if it helps to resolve the issue.

Run the Power troubleshooter on the system.

Refer these steps:

• Press Windows key + X, select Control panel.
• Change the view by option on the top right to Large icons
• Click on troubleshooting and click on the view all option on the left panel
• Run the Power troubleshooter

Further you can try creating a new power plan according to your preference. Refer the link below for more details on Power Plans.

Power Plans: frequently asked questions

http://windows.microsoft.com/en-us/windows/power-plans-faq#1TC=windows-8

(Steps in the article, applies to Windows 10).

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.