Windows 10: Trying to apply windows 10 updates

Discus and support Trying to apply windows 10 updates in Windows 10 Installation and Upgrade to solve the problem; When Win 10 tries to install the Feature update to ver. 1709 it downloads the update just fine. During the install it gets to 53% and stays there. I... Discussion in 'Windows 10 Installation and Upgrade' started by Docfxit, Feb 23, 2018.

  1. Docfxit Win User

    Trying to apply windows 10 updates


    When Win 10 tries to install the Feature update to ver. 1709 it downloads the update just fine. During the install it gets to 53% and stays there. I have let it stay there 24hrs.
    I have run
    chkdsk /r /f
    In powershell As Administrator I ran:
    if (([Security.Principal.WindowsPrincipal] [Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator"))
    {Write-Output 'Running as Administrator!'}
    else
    {Write-Output 'Running Limited!'}
    DISM /Online /Cleanup-Image /RestoreHealth
    sfc /scannow
    Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
    The above line comes up with a lot of red errors.
    I downloaded from Microsoft Win 10 PRO ISO ver. 1709 and did an in place install.
    I get an error saying:
    0xC1900101 - 03000D
    The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

    Currently I have 26.9 GB of free space
    All other updates have been installed.
    I don't have anything else plugged into the machine.
    I don't see any errors in Device Manager.
    Windows Defender is turned off.
    Windows firewall is turned off.
    I don't have any other firewall installed on the machine.
    I Uninstalled:
    Bitdefender
    Malwarebytes
    CCLeaner
    I have cleaned out all temp files.
    I have renamed the C:\WINDOWS\SoftwareDistribution folder.
    I don't have any other antivirus/malware software on the machine.
    I did the install with a clean boot running as Administrator.
    I'm currently running Win10 ver. 1607
    I ran Win 10 Feature update ver 1709 with Windows Update MiniTool.
    It said it succeeded and a reboot is required.
    It still reports Win 10 is at ver. 1607.
    I ran Check for updates again. It showed Win 10 Feature update ver 1709 ready.
    It asked for a reboot.
    It shows working on updates. It ended up with A restart is required.
    After the restart it started installing updates. It's stuck at 53%.
    It's been running for over 20hrs at 53%. I've tried this many times and every time It is stuck at 53%.



    :)
     
    Docfxit, Feb 23, 2018
    #1
  2. billth87 Win User

    Cannot apply security updates to Windows 10 IoT Enterprise 2016 LTSB

    I installed Windows 10 IoT Enterprise 2016 LTSB on a new HP computer. The install went fine and I updated all the drivers. Now I want to get the latest security update. I downloaded the 64 bit version of KB4019474
    (May 5, 2017 cumulative security update) but it would not install, says "The update is not applicable to your computer".

    I borrowed a WiFi adapter and connected to the office Wifi. It activated automatically. It says
    it is activated with a digital license. We tried to apply KB4019474 again and it again said no. We tried to update and it said it could not connect to the update service.

    I used the same WiFi adapter and connected a older HP workstation that has 2015 LTSB to the office WiFi. It was able to get to the update service and download the latest Windows Defender definitions.

    Why can't I get updates from the PC with the 2016 LTSB OS?
     
    billth87, Feb 23, 2018
    #2
  3. PA Bear - MS MVP, Feb 23, 2018
    #3
  4. dalchina New Member

    Trying to apply windows 10 updates

    Hi, very thorough.... that result code indicates:
    Code 0xC1900101 - 0x3000D
    Cause Installation failed during the FIRST_BOOT phase while attempting the MIGRATE_DATA operation.
    This can occur due to a problem with a display driver. Mitigation Disconnect all peripheral devices that are connected to the system, except for the mouse, keyboard and display.
    Update or uninstall the display driver.
    Resolve Windows 10 upgrade errors - Windows IT Pro | Microsoft Docs
    (from e.g.
    Upgrade to Windows 10 Windows 10 Tutorials
    'Resolve....')

    Noted you said
    "First boot phase: Boot failures in this phase are relatively rare, and almost exclusively caused by device drivers. Disconnect all peripheral devices except for the mouse, keyboard, and display. Obtain and install updated device drivers, then retry the upgrade."

    You say you've run
    DISM /Online /Cleanup-Image /RestoreHealth
    sfc /scannow
    chkdsk /r /f
    - can you confirm these passed please.

    Please post these logs:

    • C:\$Windows.~BT\Sources\Rollback\setupact.log
    • C:\$Windows.~BT\Sources\Rollback\setupact.err

    Should they not exist, try here:
    C:\$Windows.~BT\Sources\panther\
     
    dalchina, Feb 23, 2018
    #4
  5. Docfxit Win User
    I have updated the Intel HD graphics driver
    from 20.19.15.4424
    To 20.19.15.4835
    I have updated the HID-Compliant Touch Screen
    From 10.0.14393.2068
    To 11.25.8.938

    I will re-run these now and post the results.
    DISM /Online /Cleanup-Image /RestoreHealth
    sfc /scannow
    chkdsk /r /f

    Thank you for the suggestions.
     
    Docfxit, Feb 23, 2018
    #5
  6. dalchina New Member
    Looks like you should have at least these logs:
    C:\$WINDOWS.~BT\Sources\Panther\SetupAct.log
    C:\$WINDOWS.~BT\Sources\Panther\diagerr.xml
    C:\$WINDOWS.~BT\Sources\rollback\setupact.log
    C:\$WINDOWS.~BT\Sources\rollback\setupapi\setupapi.dev.log
    C:\$WINDOWS.~BT\Sources\rollback\setupapi\setupapi.offline.log
     
    dalchina, Feb 23, 2018
    #6
  7. Docfxit Win User
    I have attached the files I currently have. I think the other files were on the machine but they are not there now. Probably because I have run
    DISM /Online /Cleanup-Image /RestoreHealth

    Thanks,
     
    Docfxit, Feb 23, 2018
    #7
  8. Docfxit Win User

    Trying to apply windows 10 updates

    I have run this twice and it found corrupt files and successfully repaired them both times.

    Running as Administrator!

    Code: Deployment Image Servicing and Management tool Version: 10.0.14393.0 Image Version: 10.0.14393.0 [==========================100.0%==========================] The restore operation completed successfully. The operation completed successfully. Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not supported in offline servicing scenarios. Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.3_1.3.23901.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.3_1.3.23901.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00_14.0.23816.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00_14.0.23816.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Messaging_3.19.1001.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Appconnector_1.3.3.0_neutral__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.CommsPhone_2.12.14001.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.0_1.0.22929.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.0_1.0.22929.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Runtime.1.0_1.0.22929.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Runtime.1.0_1.0.22929.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00_14.0.24123.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00_14.0.24123.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\9E2F88E3.Twitter_5.4.1.0_x86__wgeqdkkx372wm\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.DesktopAppInstaller_1.0.2181.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.XboxIdentityProvider_11.19.19003.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.ConnectivityStore_1.1604.4.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.StorePurchaseApp_11608.1000.2431.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.OneConnect_1.1607.6.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsPhone_10.1609.2561.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.MicrosoftOfficeHub_17.7608.23501.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.3DBuilder_12.0.3131.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Windows.Photos_16.1118.10000.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.2_1.2.23231.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Framework.1.2_1.2.23231.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Runtime.1.1_1.1.23406.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.NET.Native.Runtime.1.1_1.1.23406.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Advertising.Xaml_10.1611.3.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Advertising.Xaml_10.1611.3.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\AppXManifest.xml:String) [Add-AppxPackage], ItemNotFoundException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsMaps_5.1611.3342.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.BingSports_4.18.37.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.BingWeather_4.18.37.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.BingFinance_4.18.37.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\microsoft.windowscommunicationsapps_17.7714.42037.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.BingNews_4.18.41.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.120.00_12.0.21005.1_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.120.00_12.0.21005.1_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\flaregamesGmbH.RoyalRevolt2_2.7.0.2_x86__g0q0z3kw54rap\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsFeedbackHub_1.1611.3471.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Drawboard.DrawboardPDF_5.1.50.0_x64__gqbn7fs4pywxm\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\microsoft.windowscommunicationsapps_17.7805.42277.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\king.com.CandyCrushSodaSaga_1.81.900.0_x86__kgqvnymyfvs32\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Facebook.Facebook_75.717.63029.0_x86__8xx8rvfyw5nnt\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.MicrosoftSolitaireCollection_3.12.12200.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Office.Sway_17.7766.45161.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.MicrosoftStickyNotes_1.4.7.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.MinecraftUWP_1.0.20.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\LenovoCorporation.LenovoSettings_3.145.0.0_x86__4642shxvsv8s2\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\E046963F.LenovoCompanion_3.66.1.0_x86__k1h2ywk1493x8\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.SkypeApp_11.10.152.0_x64__kzf8qxf38zg5c\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsAlarms_10.1701.10103.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsStore_11610.1001.25.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\king.com.ParadiseBay_2.2.0.0_x86__kgqvnymyfvs32\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Getstarted_4.4.11.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsCalculator_10.1701.10102.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Office.PowerPoint_17.7766.42791.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Office.Excel_17.7766.50321.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Office.Word_17.7766.47821.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.People_10.1.3410.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.XboxApp_24.25.26002.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsSoundRecorder_10.1701.10102.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.ZuneMusic_10.16122.10271.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.WindowsCamera_2016.1215.40.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.ZuneVideo_10.16122.10291.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.Office.OneNote_17.7766.57821.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\microsoft.windowscommunicationsapps_17.7830.42257.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00.UWPDesktop_14.0.25426.0_x86__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\Microsoft.VCLibs.140.00.UWPDesktop_14.0.25426.0_x64__8wekyb3d8bbwe\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Cannot find path 'C:\Program Files\WindowsApps\XBMCFoundation.Kodi_17.6.2.0_x86__4n2hpmxwrvr6p\AppXManifest.xml' because it does not exist. At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (C:\Program File...ppXManifest.xml:String) [Add-AppxPackage], ItemNotFou ndException + FullyQualifiedErrorId : PathNotFound,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Add-AppxPackage : Deployment failed with HRESULT: 0x80073D02, The package could not be installed because resources it modifies are currently in use. error 0x80004004: Unable to install because the following apps need to be closed Microsoft.Windows.ShellExperienceHost_cw5n1h2txyewy!App. NOTE: For additional information, look for [ActivityId] d09f54f4-adaa-0000-dd68-9fd0aaadd301 in the Event Log or use the command line Get-AppxLog -ActivityID d09f54f4-adaa-0000-dd68-9fd0aaadd301 At C:\Dnload\WindowsInstallerFixes\SFCWithinWindows.ps1:7 char:38 + ... | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.I ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (C:\WINDOWS\Syst...ppXManifest.xml:String) [Add-AppxPackage], Exception + FullyQualifiedErrorId : DeploymentError,Microsoft.Windows.Appx.PackageManager.Commands.AddAppxPackageCommand Press Enter to continue...:[/quote] [/quote]
    L: My Computer
    Trying to apply windows 10 updates [​IMG]
    You need to have JavaScript enabled so that you can use this ... Computer Type: Laptop
    OS: Win 10

    Trying to apply windows 10 updates [​IMG]

    Trying to apply windows 10 updates [​IMG]
    Quote

    [*]
    Member Posts : 26 Win 10
    Trying to apply windows 10 updates [​IMG]
    New[/b] 24 Feb 2018 #7
     
    Docfxit, Feb 23, 2018
    #8
  9. Docfxit Win User
    I ran SFC twice. They both came up with problems and fixed them.
     
    Docfxit, Feb 23, 2018
    #9
  10. EdTittel Win User
    Where SFC is concerned, conventional wisdom is that it's necessary to run it at least 3 times. Personally, I run it until it comes up with "nothing to fix" on the most recent pass. Then I know it's done.
    HTH,
    --Ed--
     
    EdTittel, Feb 23, 2018
    #10
  11. Docfxit Win User
    Code: ------< Log generate on 2/24/2018 4:42:37 PM >------ Category: 0 Computer Name: Tablet Event Code: 1001 Record Number: 63758 Source Name: Microsoft-Windows-Wininit Time Written: 02-24-2018 @ 22:06:48 Event Type: Information User: Message: Checking file system on C: The type of the file system is NTFS. Volume label is Windows. A disk check has been scheduled. Windows will now check the disk. Stage 1: Examining basic file system structure ... 704512 file records processed. File verification completed. 36380 large file records processed. 0 bad file records processed. Stage 2: Examining file name linkage ... 1040660 index entries processed. Index verification completed. 0 unindexed files scanned. 0 unindexed files recovered to lost and found. Stage 3: Examining security descriptors ... Cleaning up 1036 unused index entries from index $SII of file 0x9. Cleaning up 1036 unused index entries from index $SDH of file 0x9. Cleaning up 1036 unused security descriptors. Security descriptor verification completed. 168075 data files processed. CHKDSK is verifying Usn Journal... 36782416 USN bytes processed. Usn Journal verification completed. Stage 4: Looking for bad clusters in user file data ... 704496 files processed. File data verification completed. Stage 5: Looking for bad, free clusters ... 5088221 free clusters processed. Free space verification is complete. Windows has scanned the file system and found no problems. No further action is required. 120829951 KB total disk space. 99286484 KB in 444873 files. 368308 KB in 168076 indexes. 0 KB in bad sectors. 822275 KB in use by the system. 65536 KB occupied by the log file. 20352884 KB available on disk. 4096 bytes in each allocation unit. 30207487 total allocation units on disk. 5088221 allocation units available on disk. Internal Info: 00 c0 0a 00 e2 59 09 00 c7 b7 11 00 00 00 00 00 .....Y.......... 59 02 00 00 42 24 01 00 00 00 00 00 00 00 00 00 Y...B$.......... Windows has finished checking your disk. Please wait while your computer restarts.[/quote]
     
    Docfxit, Feb 24, 2018
    #11
  12. Docfxit Win User
    This is the third run of SFC.

    I'm running it again.
     
    Docfxit, Feb 24, 2018
    #12
  13. Docfxit Win User

    Trying to apply windows 10 updates

    This is the Fourth run of SFC. It's still reporting problems and saying it has fixed them.
    It seems to me SFC is repairing the same files over and over again. It seems to me the files SFC is using in the store are corrupt.
    How can I rebuild the store that SFC is getting the files from. Does that store get rebuilt if I do an in place upgrade to ver. 1709?

    Thanks,
     
    Docfxit, Feb 24, 2018
    #13
  14. dalchina New Member
    Hi,
    1. The SFC report shows a significant number of different problems, indicating significant corruption. Examples:
    iexplore.exe, Windows Media Player, Windows Photo Viewer, Windows Mail, wordpad.exe, Microsoft\Framework\v3.5\Microsoft.VisualC (many), Windows Defender.

    It does end with
    Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

    I find this puzzling as you noted, as you have repeatedly run SFC /SCANNOW - unless your disk is bad.

    Please check your disk.
    Download and install Hard Disk Sentinel (trial) and post a screenshot of its GUI.
    To post a screenshot please use the icon above your post to the left of the video icon above your post.

    2. An in-place upgrade repair is certainly one useful approach which might solve some problems. It shouldn't be essential for SFC /SCANNOW to pass for the upgrade to occur though, assuming only minor discrepancies.

    Do you have the iso for your 1607 build?

    3. If HD Sentinel passes, please run
    chkdsk C: /scan
    and report the summary result

    4. Also post a screenshot of your partitions using Minitool Partition Wizard (free) expanding all columns as necessary so all text is shown. Make sure all relevant columns are included for all disks. (Do not use Disk Management).

    5. Programs:
    setupactpanther.log
    You appear to have significant remnants of Bitdefender and Malwarebytes - please remove these.
    Also remove a VPN program called IPvanish.

    6. Try this:
    Go to Control Panel > Programs and Features > Turn Windows Features on and Off.
    Turn off anything you've enabled, and IIS Internet Information Services if enabled.

    ====================================
    diagerr.xml:
    Did not find hard disk space needed, when update cab files will not be extracted. This is unexpected! hr = 0x8000ffff" PID="6472" TID="7164" Con="" Exe="C:\$WINDOWS.~BT\Sources\SetupHost.exe" Mod="SetupPlatform.dll" Err="0" MD="" DT="2018-02-24T11:21:51"/>
    <z:row Cls="D" Sev="33554432" Maj="Def" Min="Def" LN="1814" Fil="" Fun="CSetupPlatform:*BiggrinownloadDynamicUpdates" Uid="34373632" Msg="CSetupPlatform:*BiggrinownloadDynamicUpdates: Failed to download updates. Error: 0x8000FFFF" PID="6472" TID="7164" Con="" Exe="C:\$WINDOWS.~BT\Sources\SetupHost.exe"
     
    dalchina, Feb 24, 2018
    #14
  15. dalchina New Member
Thema:

Trying to apply windows 10 updates

Loading...
  1. Trying to apply windows 10 updates - Similar Threads - Trying apply updates

  2. Windows update will not apply

    in Windows 10 Gaming
    Windows update will not apply: I have a Windows 7 Pro that will not apply the following updates:Kb4516065 Kb4474419Kb4524752Kb4535102We are trying to catch up on some missed updates. The listed updates will not apply for some reason. The updates download and install just fine initially. After the reboot we...
  3. Windows update will not apply

    in Windows 10 Software and Apps
    Windows update will not apply: I have a Windows 7 Pro that will not apply the following updates:Kb4516065 Kb4474419Kb4524752Kb4535102We are trying to catch up on some missed updates. The listed updates will not apply for some reason. The updates download and install just fine initially. After the reboot we...
  4. Cannot apply OS update my Windows 10

    in Windows 10 Software and Apps
    Cannot apply OS update my Windows 10: My windows update is saying my OS is EOL and it needs to be patched. I've tried running the update and it keeps failing so I downloaded the Win 10 2004 Nov 2021 update and tried to reinstall and it keeps hanging at 31%. I've followed all the articles I could find for Win 10...
  5. Cannot apply OS update my Windows 10

    in Windows 10 Installation and Upgrade
    Cannot apply OS update my Windows 10: My windows update is saying my OS is EOL and it needs to be patched. I've tried running the update and it keeps failing so I downloaded the Win 10 2004 Nov 2021 update and tried to reinstall and it keeps hanging at 31%. I've followed all the articles I could find for Win 10...
  6. Getting error 0x800f081f when trying to apply update

    in Windows 10 BSOD Crashes and Debugging
    Getting error 0x800f081f when trying to apply update: On the weekends I mark it a point to check updates for my Surface Go 3 I think. So, it's running Windows 10 Home in S mode. Twice today an update has failed the with error of 0x800f081f. The update that is failing is KB5005033. I just looked at the update log and see if it's...
  7. Error when trying to apply a windows update to a windows 10 iso

    in Windows 10 Ask Insider
    Error when trying to apply a windows update to a windows 10 iso: Trying to apply update KB5000802 to a Windows 10 20H2 iso downloaded directly from microsoft but I keep getting this error: Processing 1 of 1 - C:\updates\msu\windows10.0-kb5000802-x64_f1da84b3bfa1c402d98dfb3815b1f81d7dceb001.msu: An error occurred applying the Unattend.xml...
  8. Windows update will not actually apply?

    in Windows 10 Ask Insider
    Windows update will not actually apply?: I've been trying to run updates to v2004 on our network and some machines will go through the motions and actually show as complete and successful, but the update actually isn't applied. It's still on 1909. It's attempted over and over to no avail and I can not figure out...
  9. windows 10 cannot configure all components when it try to update, hours spent in applying...

    in Windows 10 Installation and Upgrade
    windows 10 cannot configure all components when it try to update, hours spent in applying...: How do I find out which components windows can not configure, updates go on then all have to come back off https://answers.microsoft.com/en-us/windows/forum/all/windows-10-cannot-configure-all-components-when-it/936873de-2343-4f69-b5cd-f56e78ba3ef4
  10. Windows Updates not getting applied

    in Windows 10 Updates and Activation
    Windows Updates not getting applied: Hi All I have a friends computer - hard disk is running 99 - 100% utilization all the time.... Everything you do on it is painful. I booted into Safe Mode and same issue. So, started by applying all of the firmware updates from his vendor (ACER)... then updated Windows .......