Windows 10: Trying to determine if Motherboard or GPU may be causing random problems

Currently I'm having some rather intermittent and varied issues with my PC, across a wide variety of programs. The symptoms are as followsComputer will randomly be restartedDestiny 2 will randomly crash with error code Broccoli indicates an error detecting the GPU/driver, or experience sudden significant frame drops despite low GPU usage in Task Manager Performance ViewChrome and Edge tabs will randomly crash with a Status_Access_Violation error*Unsure if related, but internet will occasionally blip out for 10-15 seconds while on ethernet, router itself does not seem to indicate internet los

:)

 

method to determine exactly what caused a particular update?

Two suggested articles from Microsoft....

• Fix Windows Update errors
• Troubleshoot problems updating Windows 10

Whether you find the exact cause will determine the level of troubleshooting you go through.

 

[SOLVED] General "stuttering" not GPU related

I had similar stuttering including on desktop a long time ago on a X58 i7 930 and HD5870 that randomly and rarely appeared. I never found what the issue really was, but as I changed hard drive to an SSD and installed fresh windows, the issue went away.

Before doing anything i suggest trying to determine if a peripheral on ur PC is causing this issue (due to drivers?) and trying a different GPU driver version performing a clean install for it.

Your next step would be to remove your SSD, make a partition on your 750GB HDD and install a fresh version of windows so you can determine that its either the SSD or a random windows/driver conflict.

 

Nvidia driver problem with 940 MX on Windows 10 x64

I would only go back to the driver from the computers manufacturers if you experience any issues with the latest drivers from devie manufacturers.

If everything is still working well with the clean boot then you can start troubleshooting as follows to start:

How to determine what is causing the problem after you do a clean boot


1. Log on to the computer by using an account that has administrator rights.
2. From Start, search for msconfig. (In Windows 10, use the Search box from the Start menu. In Windows 8 or 8.1, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click Search.)
3. Select msconfig or System Configuration from the search results.
4. Tap or click the Services tab, and then tap or click to select the Hide all Microsoft services check box.
5. Tap or click to select the upper half of the check boxes in the Service list.
6. Tap or click OK, and then tap or click Restart.
7. After the computer finishes restarting, determine whether the problem still occurs.
• If the problem still occurs, repeat steps 1 through 6, but clear the lower half of the check boxes in the Service list that you originally selected.
• If the problem does not occur, repeat steps 1 through 6, and select only the upper half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem when only one service is selected in the Service list, this means that the selected service causes the problem, and you should go to step 11. If no service causes the problem, go to step 8.
8. Repeat steps 1 and 3 in this section.
9. Tap or click the Startup tab, and then tap or click to select the upper half of the check boxes in the Startup Item list.
10. Click OK, and then click Restart.
• If the problem still occurs, repeat steps 8 and 9, but clear the lower half of the checked boxes in the Startup Item list that you originally selected.
• If the problem does not occur, repeat steps 8 and 9, and select only the upper half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.
• If you still experience the problem after only one Startup Item is selected in the Startup Item list, this means that the selected Startup Item causes the problem, and you should go to step 11. If no Startup Item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 1 through 7 without selecting the Hide all Microsoft services check box in each step.
11. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration utility, and then tap or click to clear the check box for the problem item.
From <https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows>