Windows 10: Trying to reset using system settings

Trying to reset PC but it will fail everytime. Im using settings to do it and I dont have anything on the PC. PC is slow so I suspect reset will fix it. I already made a back up on my files so it is fine to re install programs. I just want to reset it.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Black screen after trying to reset back to factory settings. (Windows 10)

Hi Simen,



I realize the inconvenience you are experiencing with black screen issue on Windows 10 . I will certainly help you.



This issue might occur if there is change in system settings or display driver is corrupt.



I suggest you to follow the steps below to



To assist you better, please provide us the information below:

• When you say that "reset my computer back to factory settings", are you referring that you have tried to perform rolling back to previous Operating System or performed Reset of Windows 10?
  
• Are you able to see Windows 10 logo when you switch on the computer?

I suggest you to follow the steps provided in the Microsoft Help Article about troubleshooting on black screen related issues and check if it helps.

Troubleshoot black screen or blank screen errors

Please get back to us with an update on black screen issue with Windows 10, we will be happy to help.



Thank you.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.