Windows 10: Unable to activate windows 11 after formatting

I bought HP laptop which had windows 11 home preinstalled in it. I had some virus as well as slow speed issue with my laptop and had to format the system which reinstalled the windows. Now, I continuously find an "Activate Windows" or "Enter product key" notifications. I tried to upgrade as well, but nothing's working out. Can't windows recognize the laptop because i reinstalled it from local then why this happening ?Please help me .

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Unable to format USB drive in Windows 10

IF windows are not able to format USB drive then apply these manual steps as follows:
First open run command box > Now, write diskpart and hit enter > Once
Diskpart is open > Now writing the commands, one by one.
Command 1: List disk
[Now, it will list Disk 0 and Disk 1 in your PC. Clearly Disk 0 is your hard disk and Disk 1 is the USB flash drive.]
Now, write the commands given below One by One.
Command 2: Select disk
Command 3: clean
Command 4: create partition primary
Command 5: active
Command 6: select partition 1
Command 7: format fs=fat32
[In the above command fat32 is chosen as a file system, if you want to choose NTFS, you can choose that as well.]
It will take time. Do not close the window before it's completed.
This manual steps may help you to format the drive. Thanks

 

Memory card unable to format

Hello,

The error that you are getting might be caused by disk write protection. We suggest following the steps below to help with your concern:

• Type This PC in Cortana search box then press
  Enter.
• On the pop-up window, right click on This PC.
• Click on Manage.
• Choose Disk Management on the left pane to open Windows Disk Management.
• Select the Micro SD card, USB or flash drive that you need to format.
• Right click and click Format.

Let us know if this works for you.