Windows 10: Unable to boot through USB and cd

This product is covered by one or more of the following patents.Arlight I was messing with some patents and now when I tryed to restart my computer it wouldn't boot and it gave me this error:Intel UNDI, PXE-2.1 build 083 copyright c 1997-2000 Intel Corporation This Product is covered by one or more of the following patents:US5, 307, 459 US5 434, 872 US5, 732, 094, US6 570, 884 US6, 155, 776 and US6 327,625REALTEK PCLE FE Family CONTROLER SERVICE V1.23 7/28/10PXE-E61: Medie test failure, check cablePXE-M0F: Exiting PXE ROM.Reboot and select proper boot deviceor Insert Boot Media in select

:)

 

HD 5870 Bios flash failed

mp3 player is in FAT / FAT32 format ?

Set Boot up first to the drive with hiren bootcd 10.4
Done...

the options will pop out after loading the disc choose

boot cd

then the list (step by step)

Next...
Dos....
USB Drivers....
Load USB Drivers with no386.....

Ask you load cd drivers. NO
Ask you load SCSI drivers. NO
Ask you anything NO.
USB driver list comes out. 8 Don't choose anything else.

type
C:\ (that should be your mp3 player if you did it right)

atiflash -i
to list the adapters

atiflash -p -f 0 ???.bin

done.........

 

Unable to boot the computer.

Hi Samid,

Thank you for posting your query on Microsoft Community.

Before we proceed, we would require more information to assist you further.

• 
  What is the make and model of your computer?
  

I suggest you check if you are able to boot into Windows Recovery Environment using installation media. Follow the steps provided below and check.

• • Insert the installation USB and boot Windows 10 from it.
  • In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
  • Click on ‘Repair your computer’ and select ‘Troubleshoot’.

Check if you are able to boot to this window. If you are unable to boot to this window, I suggest you to contact the manufacturer and check.

Hope this information is helpful. Reply us with this information to assist you further.

Thank you.

 

Booting from USB on x38 Motherboard, NOT?

See sys specs... ASUS ROG x38 motherboard, flashed to x48 Rampage.

In BIOS under "Boot Device Priority", I select and of the 3 boot device slots, and no where do I find an option for USB, these are the only options in each:

• 1st floopy drive
• HDD: P0-WDC WD2500KS
• ATAPI CD-ROM
• Disabled

Is there a place in the BIOS to enable boot from USB?

It's AMI, says v02.61 on the BIOS screen