Windows 10: Unable to boot Windows from a SSD

Over the past few days, I have been trying to switch over my Windows from my hard drive to my SSD in an attempt to help it boot faster it takes 15-25 minutes to boot on my hard driveSo far, I have completely unplugged my hard drive from my computer. I have a USB installation media that is working and being read by my BIOS. When I run the install on the SSD, everything works. This is where my issue started to formafter the installation, the monitor on my computer not the computer itself turns off and will not display anything until I restart my pc. After I go through the restart, the PC sho

:)

 

Unable to boot Windows after cloning it to SSD

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are facing issues while booting the PC after cloning Windows to new SSD. I would like to know what happens when you try to boot the PC to desktop using SSD?



The reason you are not able to boot the PC is that the files required to boot Windows are still recognizing the HDD as the main drive. I would suggest you to try rebuilding the BCD files and see if you are able to boot the PC using
SSD.



Kindly follow the steps below to rebuild the BCD.

1. Create a bootable media and boot the PC using the media.
2. On the Install Windows screen, select Next >
   Repair your computer.
3. On the System Recovery Options screen, select
   Troubleshoot> Advanced options > Command Prompt.
4. Now type in the commands and hit enter: BOOTREC /FIXMBR
   
   BOOTREC /FIXBOOT
   
   BOOTREC /scanos
   
   BOOTREC /rebuildbcd
5. Restart the PC.

If the issue persists, please get back to us with the results of the troubleshooting steps to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

Unable to boot the computer.

Hi Samid,

Thank you for posting your query on Microsoft Community.

Before we proceed, we would require more information to assist you further.

• 
  What is the make and model of your computer?
  

I suggest you check if you are able to boot into Windows Recovery Environment using installation media. Follow the steps provided below and check.

• • Insert the installation USB and boot Windows 10 from it.
  • In the ‘Windows setup’ page select the ‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
  • Click on ‘Repair your computer’ and select ‘Troubleshoot’.

Check if you are able to boot to this window. If you are unable to boot to this window, I suggest you to contact the manufacturer and check.

Hope this information is helpful. Reply us with this information to assist you further.

Thank you.

 

Unable to Boot to SSD after Windows 10 Install

Thanks in advance to anyone who takes the time read this, I will try to keep it short, but I have been struggling for a while with this and tried a lot of different things!

Computer Info:

• Windows 10 Home v.2004 Build 19041.450
  
• AMD Ryzen 7 2700x
  
• 32GB RAM
  
• Aorus Ultra Gaming X470 BIOS Version F30 (I have tried updating the BIOS with continued problems, so I stayed at this version)
  
• Windows currently installed on HDD Western Digital WDC WD10EZEX-22BN5A0 (this one is super old thus the attempt to transition to a new SSD)
  
• I also have another HDD and SSD installed that I use for storage
  

Main Problem: I am unable to get my computer to boot to my Samsung 850 EVO 250GB SSD after installing Windows on it from the Media Creation Tool (I have also tried Rufus which ends up the same)

Prevailing Error Code: When I have just that SSD connected to the computer it will try to boot and give me the error message "Reboot and Select Proper Boot Device"

The Process I have Followed:

1. Clean/Wipe SSD using diskpart
   
2. Shut down PC, disconnect power cord, hold power button
   
3. Disconnect all other drives, USBs, etc.
   
4. Boot to BIOS, which sees both the Media Creation Tool (MCT) and the SSD
   
   1. Disable CSM Support
      
   2. Disable Secure Boot
      
5. I have tried both setting the MCT and the SSD as the 1st Boot Priority, as well as going to the Boot Order Menu, and selecting the MCT from there
   
6. Once inside the Windows install, I have tried both 'New' when selecting the SSD, as well as simply hitting 'Next'. The MCT does the install no problem, but then when it says "Windows Needs to Restart to Complete the Installation" is when I have problems
   
   1. (interestingly the MCT only creates 3 Partitions on the SSD - does not create the 'Recovery' Partition)
      
7. PC will Reboot but go right back to the MCT
   
8. When I go back to the BIOS, the SSD is no longer "seen", if I simply remove the MCT flashdrive then I get the "Reboot and Select Proper Boot Device" error
   

I will link forums that I have follow to the T. I have experience with computers so I do not skip steps or take shortcuts.

• Cant Install on SSD
  
• Clean Install Windows 10
  
• Clean Install Windows 10 v.2
  

Please someone help if possible! I will keep an eye on this post, and will be responding with answers as possible.

Thanks again for your time.