Windows 10: unable to install TP link bluetooth 5.0 dongle driver

I am using Windows 7 64 bit OSTrying to install bluetooth adapter driver but it shows the following error"there are unauthorised bluetooth adapters in your system" Now to check and disable previously installed driver Such as Intel, I opened device manager, there 'Show hidden files" but still unable to find 'Intel bluetooth drivers'. I can only see 'Realtek PCIe FE family controller' but not intel bluetooth wireless driver.'Restarted bluetooth support service' too but still the same error. After inserting TP link 5.0 bluetooth device, it shows 'Bluetooth radios', there tried disabling 'Gener

:)

 

Problem with USB Bluetooth Dongle TP-Link UB400

Hi, I tried many different troubleshooting steps and none seem to work, it shows up as KOGA dongle Bluetooth headset when all it is a small dongle. No devices pop up in discovery mode either. I tried both the generic Bluetooth adapter driver and the CSR 4.0 driver that TP-Link's website had me download neither worked as no devices show up in discovery.

 

Bluetooth driver error - USB dongle BT 4.0

I have bluetooth dongle that does not seem to be recognized by my win 10 system. Version 22H2 (OS Build 19045.3693) Here is the error : This device is not working properly because Windows cannot load the drivers required for this device. (Code 31) What I have tried :

• Device Manager and tried to reinstalled, disable, enable etc with no luck. turned the bluetooth setting off and on and still not luck. ran the troubleshooting for bluetooth and it does not repair anything.

When I went to the device website, it says that Win 10 will automatically plug and play and it doesn't need a driver: Cambridge Silicon Radio Bluetooth Driver | Device Drivers The device name is : CSR8510 A10 and in device managers it is Generic Bluetooth Radio with a yellow exclamation point. Here are some of the errors in the properties settings : Device USB\VID_0A12&PID_0001\6&1ff8b909&0&12 was not migrated due to partial or ambiguous match. Last Device Instance Id: USB\VID_8087&PID_0A2A\5&2CCCB896&0&2 Class Guid: {e0cbf06c-cd8b-4647-bb8a-263b43f0f974} Location Path: Migration Rank: 0xF000FFFF0000F120 Present: false Status: 0xC0000719 Thank you for looking. I am open to suggestions on what to try next.

 

tp-link bluetooth allow a device to connect greyed out

Have you tried to connect to a Bluetooth device? Here is an example connecting to Arctis 3 Bluetooth headset
Start pairing mode on headset by holding down power button until green light flashes rapidly. Note every device is different.

In Bluetooth settings click on Add Bluetooth or other device





Click on Bluetooth





Wait for headset to appear in list
When it does click on Bluetooth headset





Arctis 3 Bluetooth headset is connected and ready to use





It is now in list of Audio devices with status Connected voice. music





When Arctis 3 Bluetooth is turned off status is Paired.
Next time headset is turned on it will automatically connect