Windows 10: Unable to make changes in pendrive

I have a sony 16 GB Pendrive which when I insert it into my laptop, I can open and read all the files when I try to delete the file it is showing "You require permission from everyone to make changes to this device" as follows.Device name DESKTOP-IMUOU6E Processor IntelR CoreTM i5-3230M CPU @ 2.60GHz 2.60 GHz Installed RAM 4.00 GB 3.89 GB usable Device ID FD2A8521-A11C-4814-A5C8-9CF9E916D8FE Product ID 00327-60000-00000-AA397 System type 64-bit operating system, x64-based processor Pen and touch No pen or touch input is available for this display Edition Windows 10 Home Single Language

:)

 

Pendrive not displayed on the PC in Windows 10.

Hi Manish,



The above issue might have occurred due to the following reasons:

• Associated device files & folders are deleted on clearing the boot partition.
• Corrupted device driver installed on the PC.

Before we assist you further, I would like to ask you a few questions:

• Did you check if similar issue persists on connecting other pendrive to the PC?
• When you say “It is not displayed in my computer”, are you referring to File explorer?

If the pendrive is not showing in File explorer, remove and re-plug the device to check if the issue is resolved. Removing and re-plugging the device will resolve the temporary hardware faced prior to the attempt. If the issue persists, connect another
pendrive and check if the device is displayed under Devices & drives in File explorer. This is only to check if the issue is device specific.



If the issue persists, check if the device is detected under Device manger and update to check if the issue is resolved. Updating the device drivers will enhance the performance of the device on the PC.



Follow the steps below to update the device driver and check if the issue is resolved.

• Connect the pendrive to the PC, press Windows key + X keys on the keyboard and select
  Device Manager from the context menu.
• Expand Universal Serial Bus controllers, right-click on the pendrive driver and select
  Update this software from the context menu.
• Follow the on-screen instructions and wait for the update to complete.
• After the update is complete, close the window and check if the changes are effective.

Write to us with the status of the issue on the pendrive detected on the PC for further assistance. Your reply is most important for us to ensure we assist you accordingly.



Thank you.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Kingston 4GB Pendrive do not work any more.

When I insert my pendrive in Laptop or Desktop PC, it shows on in My Computer but when I try to open it, it says " Please insert disk into USB Drive". When I right click on the drive and want to format, it says there is no disk in the drive. When I go into Disk Management- it shows no media and Change Drive Letter and Eject are greyed out. Properties shows as 0 space.
Tried using third party Partitioning Softwares but they do not show the drive at all.
Also tried Diskpart to clean the drive but it shows- no disk.
Please help me repairing this pendrive. Please advise step by step method.
Thanking you in anticipation
Ashok