Windows 10: unfamiliar reason for a bsod

Hello as the question suggests I recently encountered a bsod that gave me a unfamiliar reason on why my computer has blue screened provided is the dump and a error code i retrieved from reliability history.0x0000001a 0x0000000000009696, 0xffff968015de4260, 0x0000000000000000, 0x0000000000000000022225-16609-01.dmp

:)

 

BSOD Unknown Reason

The dump file on the 18th was caused by Quick Heal again. The later ones appear to be due to bit flips. I would recommend enabling Driver Verifier on all third-party drivers using the following instructions: 1) Search for verifier using the Start Menu and select the verifier.exe, accept the UAC prompt and you should be presented with the following screen:

2) Tick the following options as shown below

3) Ensure that you select the option to enable you to select drivers yourself

4) Select all drivers which are not Microsoft related and then click the Finish button. Afterwards, please reboot the computer and Driver Verifier will continue to run in the background. Please do not select the drivers which are prefixed with dump_

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.