Windows 10: Update KB5029263 causes connectivity problems

After installing the KB5029263 update I am experiencing multiple connectivity issues. Both machines described below had the KB5029263 update installed and are on the same network.* RDP to another machine on the same network frequently disconnects, with connections often lasting only a few seconds. * When VPN NordVPN in this case is active on one machine the other machine cannot connect to it through RDP. It states that the other machine cannot be found. Both machines had the KB5029263 update installed. This was possible without issue before the update.* The media application Plex can no long

:)

 

Internet connectivity problems

Hello Walrus,

There can be a number of reasons for no internet connection in Windows, some common reasons that can cause these problems are:

• Corrupted or incompatible drivers.
• Missing updates.
• Network connection settings.
• Hardware or software problems.
• Inappropriate distance from the router or obstruction.
• Interference with other devices.

For us to better assist you, we'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

• Press Windows key + R, then type in winver.
• Click OK.

• Were there any recent changes made prior to this issue?

Meanwhile, we recommend performing the suggested steps in this article
to help you troubleshoot and resolve network connection issues in Windows 10.

We look forward to your response.

Regards.

 

Windows 10 update cause printer problem with: "Printer not activated - Error - 20"

Hi John,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

I understand your concern about accessing the printer after the Windows Update, we will help you with this issue.

Do let us know the following:

• What is the make and model of your device?
• How is the printer connected to the computer, locally or through network?
• Have you tried any troubleshooting steps to resolve this issue?

I suggest you to try the below and check if it helps.

Step 1: I suggest you to update the drivers for printer and check.

• 
  Right click on the Start button from the desktop and select
  Device Manager.
  
• 
  Locate and expand Print queue.
  
• 
  Right-click on the printer driver
  that is listed and click Update driver software.
  

Step 2: I suggest you to run the printer troubleshooter from
“Fix printer problems”
and then check if this fixes the issue.

Hope it helps. Reply to the post with an updated status of this issue and required information, we will be happy to help you further.

 

Internet connection causes computer to loose power.

Hello Cliff,



An outdated network adapter can be one possible reason for this.
To isolate the issue, kindly provide us these details:

• Have you made any changes on your computer prior to the issue?
• How are you connected to the internet? Is it via Ethernet cable or is it wirelessly connected?
• Have you installed the latest Windows updates?

To help us diagnose the cause of this error, we would suggest that you follow these steps:



Step 1: Boot into safe mode and check if the issue persists

Safe mode starts Windows with a minimal set of drivers and services. To boot into safe mode, kindly follow the steps on this link.



Step 2: If issue does not persist in safe mode, we suggest you to place the computer in clean boot and check which third party application driver is causing the issue.

Follow the steps on this link to
perform a clean boot.



Note: After troubleshooting, make sure to set the computer to start as usual as mentioned in Step 7 in the above KB article.



We’ll keep an eye out for your response.