Windows 10: Updated bios on PC with no operating system, keyboard is no longer working and can't get...

Was windows 10, operating system got deleted.

:)

 

Pin not working after BIOS Update

Hi Max,

It seems that your operating system was no longer aligned with your BIOS after installing a BIOS update for your HD3P main board.

For us to diagnose and address the problem, we suggest starting your computer in safe mode and check if the PIN is working while in that state. If it's working, then a 3rd party application may have caused the issue. To start your PC in safe mode, please
see
Start your PC in safe mode in Windows 10.

If the PIN is not working in safe mode, then a reset is suggested to correct the problem. The operating system should always go with the BIOS. If the BIOS is freshly updated, then the OS has to be fresh as well. Check out
Reset your PC in the link,
Recovery options in Windows 10 for the steps.

Let us know how it goes so we can further assist you.

Regards.

 

Mouse/Keyboard work in BIOS, they do not work once computer boots

I have been using computers for over 25 years now, and I have never run across a problem like this. Backstory: I built my current PC about a year ago. Everything worked perfectly until about 5 days ago. At that point, it needed to restart. I restarted it, and upon boot neither the mouse or keyboard would respond. I tried a different mouse and keyboard, they did not work either. I tried both of the mice and keyboards with another PC, and they worked fine. This absolutely rules out the problem being the inputs.Then, I noticed that the mouse and keyboard do work in BIOS. However, after exiting BIOS and booting, they stop responding altogether. I have gone into system recovery countless times and tried literally every recovery option listed, to no avail. Any suggestions to help would be GREATLY appreciated. For the past 5 days I have literally had a $3000 paperweight.

 

Programs not working

In post 26 there were steps listed to fix the operating system corruption.
Are you able to follow them?
In post 29 was the suggested dism repair command.