Windows 10: Upgrade to 21H1 failed maybe due to BCD Error

Hi, I've been using Windows 10 1803 for three years. Every time it notified me to upgrade to higher version e.g. 1903, it failed by some reason. Finally I decided to upgrade manually to the newest version 21H1 using a USB driver created by Media Creation Tool. However, it failed in the restart phase Your PC will restart in a few moment. And here are the log files from C:\$Windows.~BT\Sources\Panther. Thanks in advance for any suggestions!setupact.loghttps://drive.google.com/file/d/17SIc8GP4no0_xPwNazYlwd9IfzEc7-zB/view?usp=sharingsetuperr.loghttps://drive.google.com/file/d/1ZdXBm7kGMZvK_

:)

 

Windows defender offline error: EFI\Microsoft\Boot\BCD - 0xc0000185

Hi Dave,

Could you provide us additional information to assist you better with this issue:

• What is the make and model of your device?
• Have you made any changes to the operating system prior to this issue?
• Are you able to boot the device to desktop with this error message?

This issue might have occurred due to corruption in the boot files or BOIS unable to detect your drive to boot.

I suggest you to refer to the below thread, check if your issue matches with the same.

If so, try the troubleshooting steps suggested by -.[Final]#[Boss].- and check if
it helps.

Error code after update File:\EFI\Microsoft\Boot BCD
Error Code 0xc0000185 BSOD

Hope this information is helpful.

 

RPi2 from Windows cross compilation Error "The test for linking against libxcb failed!"

Error in Cross Compilation, I am using Qt5.0, Windows10, Raspberry Pi 2.
I was following this tutorial and the process failed at step 16 and tried with its suggestion but cannot find a solution.

Error prompted after step 16 is:

Running configuration tests...
The test for linking against libxcb failed!
Use of pkg-config is not enabled, maybe you want to pass -force-pkg-config?
You might need to install dependency packages for libxcb.
See src/plugins/platforms/xcb/README.

and when I printed log in file as tutorial suggested, there are some errors mentioned like:

• cc1plus.exe: error: unrecognized command line option '-fuse-ld=gold'
  
• error "Symbolic function binding on this architecture may be broken, disabling it (see QTBUG-36129)."
  
• etc.
  

I tried but still find no solution.

 

Error code 0xc000000f, BCD corrupted

Hi Andre,

As per the description, I suggest that you follow the steps below to fix BCD

1. Right click on the Start Menu and select Command Prompt (Admin)

2. Here type/paste the commands listed below

Bootrec /fixMBR

Bootrec /fixBoot

Bootrec /RebuildBcd

3. Once done restart the PC and check.

Hope this helps