Windows 10: Upgrade to Windows 10, no monitor signal

Hello all!


I upgraded my pc (Gateway SX2110 slim desktop) from Windows 8 to 10 last night. Downloaded from MS site, seemed to install fine. Pc rebooted after 10 setup screen (Language, keyboard layout). I keep getting "no monitor signal". Fans are spinning, i can hear drive working.


Here's what i've tried:


vga/hdmi ports on both the pc and 2 known good monitors. Computer has no dvi port, and im using onboard video.

Swapping hdmi/vga cable with known good cables.

Taking out the cmos battery for 1 hour.

Powering down the pc, unplugging power cable and holding the power button for 2 minutes.


I did notice that my usb keyboard and mouse do not light up. However, i plugged a usb dvd drive in those same usb ports and it does work. I can open and close the tray. Not sure what that means....


Also, i even tried physically swapping the sata drive with a known good sata drive (which has Windows 7 on it) just to try and see if the pc would boot and still receive no monitor signal.


I cannot even get into bios screen. Cannot boot to safe mode either. Tried rebooting holding the shift key, nothing. Rebooted 3 times hoping to get into recovery options, nothing.


Any ideas?


Thanks!

:)

 

Windows 10 Update Installed & Now No Signal to Monitor

Hi,

For us to isolate your concern with your monitor's signal, we would like to know the following:

• When you say "signal", are you referring to the Internet?
• Are you getting any error messages? If yes, what is the exact error message?
• To make sure that we have not missed on anything, what troubleshooting steps have you done so far?

We look forward to your response.

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Error: No signal on second monitor after upgrade to Windows 10

Hi,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

I understand your inconvenience caused to you with accessing the second monitor, we will help you with this issue.

This issue might have occurred due to outdated/ corrupted drivers.

As you have already tried to update the drivers and issue still persists, I suggest you to uninstall the existing drivers for second monitor and re0install them from the manufacturer's website.

Step 1: Steps to uninstall the drivers for the Display Adapter.

• Press Windows key + X key when you are at desktop.
• Select Device Manager.
• Expand Display Adapter.
• Right on the Display Adapter and click on
  Uninstall.
• Restart the computer.

Step 2: Also, contact the manufacturer's website and try to install those drivers for your device.

You can install Windows 8/8.1 drivers in compatibility mode if there are no Windows 10 compatible drivers.

Follow the steps to install in Compatibility mode:

• Download the updated driver from the manufacturer’s website.
• Right click the driver installation file and select
  Properties then tap or click the Compatibility tab.
• Place a check in the Run this program in compatibility mode for: box.
  
• Tap the drop down box and select a previous operating system, then tap or click
  OK.
• Try installing the driver and check.

To know more about this issue, I suggest you to refer to the article by
Andre Da Costa and check:

How to add and use a second monitor with Windows
10

Hope it helps. Kindly let us know if you need further assistance with Windows Operating System. We will be glad to assist you.