Windows 10: upgrade to windows 11 not showing up in windows update

I had the SSD that came preinstalled on my system fail. i replaced it and after some fixing of the recovery media boot.wim the system's intel RST version in Bios was upgraded from 16 to 17, but the files in the factory recovery were for v16 and would no longer work on my system. i had to go to another computer and edit the boot.wim, replacing the intel RST CLI file with v17 i was back at running the factory default Windows 10 Home. I immediately used the anytime upgrade or whatever they are calling it these days to go back to pro. then came the windows updates. in the past i had to work my

:)

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.