Windows 10: Upgrade Windows 7 to 10 Error 0x8007001f

Discus and support Upgrade Windows 7 to 10 Error 0x8007001f in Windows 10 Installation and Upgrade to solve the problem; Hi Folks I've been trying to upgrade from Windows 7 to Windows 10 for the last 2 weeks but to no avail. I will summarise below what I have tried to... Discussion in 'Windows 10 Installation and Upgrade' started by ned14, Mar 31, 2018.

  1. ned14 Win User

    Upgrade Windows 7 to 10 Error 0x8007001f


    Hi Folks

    I've been trying to upgrade from Windows 7 to Windows 10 for the last 2 weeks but to no avail. I will summarise below what I have tried to date. I purchased a Windows 10 Pro licence for this. I have tried to follow all of the various tips out there but I'm beginning to feel defeated.

    I would really appreciate if someone could help me understand better how to get around these errors. Last one was error code 0x8007001f but I believe this is a generic code.

    I would rather stick with windows 7 than go through a clean install. Aim of this is to do an upgrade install.7

    Preparation I have done before attempting the install:
    1. Uninstalled all external anti-virus software
    2. Placed PC in safe boot disabling all non-microsoft services
    3. Installed all recommended windows updates
    4. Run sfc /scannow with no errors
    5. Run windows installer cleanup utility with no errors
    6. Removed and deleted other user accounts on the PC
    7. After each attempted install, removed $WINDOWS.~BT, $GetCurrent and Software Distribution folders.
    8. Checked BIOS - have current version
    9. All drivers running current version
    10. Removed all external devices

    I have attempted to install via the following means:
    - Windows 10 Update assistant
    - ISO mounted to usb using media creation tool

    I would really appreciate any help you could give, as it's really starting to frustrate me.

    :)
     
    ned14, Mar 31, 2018
    #1
  2. Robert Aldwinckle on forums, Mar 31, 2018
    #2
  3. tiremna48 Win User
    error code: 0x8007001f

    I'm trying to upgrade Windows 10, keep getting error code 0x8007001f. Does anyone know what this is?
     
    tiremna48, Mar 31, 2018
    #3
  4. Tews Win User

    Upgrade Windows 7 to 10 Error 0x8007001f

    Unless you have a program(s) that you have to have, I would strongly suggest that you do a clean install... Doing an update from W7 to 10 is going to be problematic at best and impossible at worst.. Bite the bullet, do a clean install... *Tongue

    Welcome to 10 Forums!
     
  5. Samuria Win User
    Are you updating to the right version ie pro home 32bit 64 bit are you using the latest iso and you are running in normal mode not safe mode and have you got plenty of disk space free
     
    Samuria, Mar 31, 2018
    #5
  6. zbook New Member
    Open administrative command prompt and type or copy and paste:
    SetupDiag.exe

    Open file explorer > this PC > C: > in the right upper corner search for:
    c:\setupdiag\results.log > post a share link into the thread

    Run the beta log collector and post a zip into this thread:
    log collector v2-beta08.zip
    (extract > open)

    Run through this Upgrade checklist:

    UPGRADE CHECK LIST:
    Run through this check list before the next upgrade attempt:

    1) remove nonessential hardware
    docks
    USB devices
    printers
    headset
    speakers
    bluetoot devices
    USB drives (other than a windows 10 iso if used for the upgrade)
    USB Wireless Mouse or Keyboard Receiver, USB Wireless Network Card,

    2) These should be the only attached devices:
    wired mouse
    wired keyboard
    monitor

    Any of these that have been done in the past week are not necessary to repeat:

    3) open administrative command prompt and type or copy and paste: (repair file system)
    chkdsk /x /f /r
    This may take many hours so plan to run overnight
    Find the chkdsk report in the event viewer using the information in this link and post into the thread:
    Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Tutorials

    4) open administrative command prompt and copy and paste: (repair operating system)
    sfc /scannow
    dism /online /cleanup-image /restorehealth
    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    5) update windows (have all recommended updates installed) and reboot after updates

    6) uninstall all non-Microsoft antivirus software
    (This includes always on and manual software.)

    7) Verify that the drive has > 27 GB free space (At least 25 GB is needed for creating dumps)

    8) Place the computer in clean boot:
    https://support.microsoft.com/en-us/...oot-in-windows
    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki

    9) Remove all unused SATA devices

    10) Uninstall non-Microsoft disk encryption software

    11) Run disk cleanup to clean temporary and system files

    12) 1. Browse to "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
    2. Press Windows key + X > Click Command Prompt (Admin) then type "wuauclt.exe /updatenow".
    Hit Enter
    3. Open Control Panel > Windows Update and Windows 10 should begin downloading
    Script Reset Windows Update Agent

    13) Delete the folder $WINDOWS.~BT
    http://www.thewindowsclub.com/window...-fails-install

    Open disk management > post an image into the thread after widening these 2 columns: status and volume
    Make sure that the text in each row is in full view and nothing is cutoff:
    Disk Management - How to Post a Screenshot of Windows 10 Tutorials

    Download and install: Minitool partition Wizard:
    MiniTool Partition Wizard Free Edition - Free download and software reviews - CNET Download.com
    Post an image into the thread

    When chkdsk /x /f /r C: is run overnight find the results in the event viewer using the information in this link:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Tutorials

    C:\Windows\system32>chkdsk /x /f /r
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
     
    zbook, Mar 31, 2018
    #6
  7. Superfly Win User
    I have to agree with @Tews

    All my upgrades (even those that were initially fine ) went tits-up eventually.
     
    Superfly, Mar 31, 2018
    #7
  8. ned14 Win User

    Upgrade Windows 7 to 10 Error 0x8007001f

    Thanks for the feedback folks. Like I said, clean install is my least favourite option, even though I fully realise and appreciate the benefits. I do have some software which really is just too difficult to start from scratch with.

    zbook

    I've attached the info you listed.
     
    ned14, Mar 31, 2018
    #8
  9. ned14 Win User
    Screenshots of partitions and sfc/scannow results.

    Upgrade Windows 7 to 10 Error 0x8007001f [​IMG]

    Upgrade Windows 7 to 10 Error 0x8007001f [​IMG]

    Upgrade Windows 7 to 10 Error 0x8007001f [​IMG]
     
    ned14, Mar 31, 2018
    #9
  10. topgundcp Win User
    Upgrade Windows 7 to 10 Error 0x8007001f [​IMG]

    The partition layout of disk 0 (shown as disk 1 in Partition Manager) is non standard and was customized by the manufacturer. A normal Win 7 installation will have a layout:
    • 100MB System Reserved, NTFS format and marked as Active
    • C drive.
    A normal Windows 10 installation will have:
    • 550MB Reserved partition, NTFS format and marked as Active
    • C drive.
    Since you know how to use Minitool Partition Manager. Suggest to use it:
    • Create a bootable installation USB from the Windows ISO using: Rufus - Create bootable USB drives the easy way
    • Delete the 1st 2 partitions (102MB, 15GB) then create a 550MB partition, format as NTFS, label "System Reserved", assign a letter R, mark as Active
    • Move C drive next to the newly created 550MB. should look like the screen shot below, note H: drive should be C: in your case:

      Upgrade Windows 7 to 10 Error 0x8007001f [​IMG]
    • Boot up the USB created in step 1, on the first screen, press SHIFT+F10 to open the Admin command prompt then type:
      bcdboot C:\Windows /s R: /f BIOS =====> This will create the BCD to boot Windows and store in R: (550MB partition)
    • Reboot the PC then try to upgrade again
    NOTE: It is advisable to create a backup image of the whole disk 0, just in case anything goes wrong then you can restore back before making any modification.
    To create a backup image Use:
    Macrium Reflect Free Edition x64
    Macrium Reflect Free Edition x86
     
    topgundcp, Mar 31, 2018
    #10
  11. zbook New Member
    Your report shows that you are using improperly activated software.
    This forum's Rules clearly state that help will not be provided to those using Non genuine software installations.


    Rule 4
    No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc) - it is forum policy that no help shall be given to people who knowingly steal software or services.


    One of the main reasons for this is that the act of pirating the software will inevitably change the working of the software and make investigation and repair impossible. Please install a legitimate copy of the software and if you are still experiencing the issue we will be pleased to assist - No further assistance will be provided until we are satisfied that the software is genuine.




    No help will be provided whilst piracy is present.
     
    zbook, Apr 4, 2018
    #11
Thema:

Upgrade Windows 7 to 10 Error 0x8007001f

Loading...
  1. Upgrade Windows 7 to 10 Error 0x8007001f - Similar Threads - Upgrade Error 0x8007001f

  2. Windows 7 upgrade to 10 error during MIGRATE_DATA: 0x8007001F-0x3000D

    in Windows 10 Installation and Upgrade
    Windows 7 upgrade to 10 error during MIGRATE_DATA: 0x8007001F-0x3000D: I have a complex development setup on a Windows 7 Build 7601 Service Pack 1 desktop machine. Since replicating it after a clean install would take me more than a week, I am trying a version upgrade to keep all my apps and user data. I have already succeeded in migrating a...
  3. error on window update 7-10 0x8007001f

    in Windows 10 Installation and Upgrade
    error on window update 7-10 0x8007001f: So i have window 7 and i tried to updateit to 10 but it would test me 'installation failed safe_os replicate_oc'. What do I do. Could someone help me plz...
  4. Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...

    in Windows 10 Installation and Upgrade
    Upgrade from Windows 7 Home to Windows 10 error message 0x8007001F-0x2006 installation...: The diagnostics says to go to https://microsoft.com/fwlink/?LinkID=528892 The laptop is Acer Aspire 7741 running on Windows 7 Home Premium https://answers.microsoft.com/en-us/windows/forum/all/upgrade-from-windows-7-home-to-windows-10-error/894dbd9a-6abb-45a5-821d-36b450e80aba
  5. Error: 0x8007001f – 0x20006, unable to upgrade from Windows 7 to Windows 10

    in Windows 10 Installation and Upgrade
    Error: 0x8007001f – 0x20006, unable to upgrade from Windows 7 to Windows 10: Hello, Since W7home x64 is not supported anymore, i'm trying to upgrade it to W10, but it fails constantly. I did use the media creation tool and the upgrading process did go well until W10 is fully downloaded, it restarts for the 1st time and starts the install...
  6. Windows 10 Upgrade error - 0x8007001F

    in Windows 10 Installation and Upgrade
    Windows 10 Upgrade error - 0x8007001F: I'm getting the same error message repeatedly. 0x8007001F - 0x 2006. The installation failed in the SAFE_OS pgase with an error REPLICATE_OC operation. This is after I accidentally deleted the recovery drive after windows failed to back up the drive. So I renamed the...
  7. Windows 7 upgrade to 10 error 0x8007001F - 0x3000D

    in Windows 10 Installation and Upgrade
    Windows 7 upgrade to 10 error 0x8007001F - 0x3000D: Repeatedly getting this same error, and rollback to Windows 7. Any help most appreciated! SetupDiag, Disk Management, Minitool Partition Wizard files here. Log-collector gave an error--screencap attached. No non-Microsoft antivirus installed. One other wrinkle: my...
  8. Windows 7 can't upgrade to 10, error 0x8007001f-0x20006

    in Windows 10 Ask Insider
    Windows 7 can't upgrade to 10, error 0x8007001f-0x20006: [ATTACH] submitted by /u/TheTexan94 [link] [comments] https://www.reddit.com/r/Windows10/comments/eofmmy/windows_7_cant_upgrade_to_10_error/
  9. Win 7 to 10 0x8007001F upgrade error

    in Windows 10 Installation and Upgrade
    Win 7 to 10 0x8007001F upgrade error: I have user that I've attempted to upgrade to Windows 10 but it failed with error0x8007001F. To date, I've upgraded at least 200 machines and counting using the same steps and haven't had a problem. All of them are Dell Optiplex models that support Windows 10. Steps I've...
  10. Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006

    in Windows 10 Installation and Upgrade
    Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006: I'm trying to update my windows 7 machine to windows 10, using the installation guide here : https://www.microsoft.com/en-us/software-download/windows10 I'm updating to 7 to 10 while keeping my programs/files. As I update it downloads okay, and installs. Then when it...
Tags:

Users found this page by searching for:

  1. win 7 error 0x8007001f-0x2006 upgrading to win 10

    ,
  2. fix on dell 0x8007001F - 0x20006

    ,
  3. windows 7 to 10 upgrade error 0x8007001f

    ,
  4. windows ten loading srroe message 0x8007001f,
  5. windows 7 10 upgrade fails 0x8007001f 0x20006,
  6. win 7 urgrade failed 0x2006,
  7. 0x8007001f - 0x20006 windows 7 home premium,
  8. 8007001f-20006 when upgrading from windows 7,
  9. WILL A FORMAT OF HARD DRIVE FIX 0x8007001f - 0x20006,
  10. 0x8007001f - 0x20006 safe_os replicate_oc windows 7 to 10,
  11. getting error while upgrading win 7 win 10 error code: 0x8007001f-0x20006,
  12. error 0x8007001f-0x20006 en la actualizacion de windows 7 a windows 10 SAFE_OS REPLICATE_OC,
  13. 0x8007001f-ox20006,
  14. Windows 7 machine trying to upgradge to Windows 10 how do i fix the error 0x8007001f - ox20006 the installation failed in the safe_os phase with an error during replicate_oc operation,
  15. windows 10 upgrade error 0x8007001f 0x20006