Windows 10: Upgraded from 7 to 10 and can barely type

I just upgraded my laptop from 7 to 10 and although everything seems OK I can barely type. I get a letter every 30 seconds if I am lucky and usually none at all on pages like setting the pin and verifying account. I've tried a number of suggestions I've seen but to no avail

:)

 

preparing to upgrade


You can try following this guide. I suggest either step 4 or step 7.

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Upgrade Windows 7 to 10 Error 0x8007001f





The partition layout of disk 0 (shown as disk 1 in Partition Manager) is non standard and was customized by the manufacturer. A normal Win 7 installation will have a layout:

1. 100MB System Reserved, NTFS format and marked as Active
2. C drive.

A normal Windows 10 installation will have:

1. 550MB Reserved partition, NTFS format and marked as Active
2. C drive.

Since you know how to use Minitool Partition Manager. Suggest to use it:

1. Create a bootable installation USB from the Windows ISO using: Rufus - Create bootable USB drives the easy way
2. Delete the 1st 2 partitions (102MB, 15GB) then create a 550MB partition, format as NTFS, label "System Reserved", assign a letter R, mark as Active
3. Move C drive next to the newly created 550MB. should look like the screen shot below, note H: drive should be C: in your case:
   
   
   
4. Boot up the USB created in step 1, on the first screen, press SHIFT+F10 to open the Admin command prompt then type:
   bcdboot C:\Windows /s R: /f BIOS =====> This will create the BCD to boot Windows and store in R: (550MB partition)
5. Reboot the PC then try to upgrade again

NOTE: It is advisable to create a backup image of the whole disk 0, just in case anything goes wrong then you can restore back before making any modification.
To create a backup image Use:
Macrium Reflect Free Edition x64
Macrium Reflect Free Edition x86