Windows 10: Upgraded to Windows 11 and non boot drive sends me to recovery. Am able to get to windows...

I upgraded by build to Windows 11 today and after installing and rebooting I downloaded some driver updates *which I believe are inconsequential* and restarted again. When I did it took me to a recovery screen. https://imgur.com/a/wsojVaO After updating my bios it still gave me the issue and the same screen.I removed most extra drives, I still have the following:C:/ Samsung 980 BOOT / WINDOWS 11 2TBD:/ Samsung 870 Evo 1TBE:/ Samsung 970 Has an old Windows10 version from many months ago 2TBG:/ Internal HDD 1TBNow when I boot it still takes me to that page, and when I go into the B

:)

 

Windows 7 booting off wrong drive?!?!?

Please move if this is in the wrong place.

I have two hard drives, a 1.5TB drive, and a 160GB drive. Windows is installed on the 1.5TB drive, as are all my files and programs. The 160GB drive has a bunch of old files, and apparently the bootmgr and boot folder. Nothing else is on the 160GB drive, other than media files etc.

If I remove the 160GB drive from the machine, windows refuses to boot, plug it back in, it works fine. The setup with two hard drives I have now is temporary, as the 160GB drive will go into another machine.

My question is, can someone give me a step by step on how to make windows force to boot off the 1.5TB drive, ignoring the 160GB drive in the boot process completely?
I don't know how to do this in Windows 7, on XP I would just run the /fixmbr command and its related ones.

Any help would be appreciated.

Note: I would really really rather not have to wipe and reinstall, I know it can be done without one as I've had this issue with XP before.

 

Optical Drive Issue

Hi Jerry, you're welcome.

Here's mine after I rt clk'd on my Documents Folder like you show in Scrsht 11:




I'd like to wait until you reply to my question in Scrsht 12, if it is a remnant of the process try deleting the one on the dsktp and see if the one in send to also disappears. If it stays in send to, test it, and if you're still having problems I'd suggest you could go back to: Option One: To Add or Remove Items in Send To context menu for Your Account (current user) and do Step 3 to remove it and start over using Step 4 but be very careful of your steps in creating the shortcut and be sure you d&d that shortcut to the send to part of the address.

I'm busy today and I probably won't be back until the evening.

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.