Windows 10: USB 1 external drive, can I still use it on windows 10

I found an older external hard drive which was USB 1 in a storage box at home, I wonder if I can reformat it and could re-use on Windows 10 computer. Do you think it is possible and safe?Any suggestion will be much appreciated.Thank you.

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows 10 not reconizing seagate external usb drives

Thank you for sharing the solution with us for the benefit of others.

For other users who might be using other USB devices, you can try the following:

Step 1. Press Windows key + R to open the Run dialog

Step 2. Type regedit and press Enter

Step 3. Navigate to the following path:

HKEY_LOCAL_Machine > SYSTEM > CurrentControlSet > Services > USB

Step 4. If the USB key does not exist into the list, then create a new key USB under Services. Now create a new DWORD value under the key that you’ve just created

Step 5. Keep the USB key selected and right-click on the blank space at the right pane

Step 6. Select New > DWORD value from the context menu

Step 7.Rename this newly created DWORD value as DisableSelectiveSuspend

Step 8. Right-click on DisableSelectiveSuspend and select Modify

Step 9. Put 1 in Value data field and then click OK

Step 10. Reboot your PC

or

Check if the drive is assigned a drive letter.

Press Windows key + X

Click Disk Management

If you see your drive listed there, but no drive letter, right click it

Click Change Drive Letter and Paths

Click Add

Click Assign the following drive letter

Click in the Drive letter list box

Choose a drive letter - try choosing letters near the end of the alphabet

Click OK

Click OK again

If that does not work...

Press Windows key + X

Click Device Manager

Expand Disk drives

Right click the external drive

Click uninstall

Exit Device Manager, restart then check if its detected.

 

External hard drive not recognised

Thanks for this. I've done what you suggested and been through all the steps mentioned in the article. The hard drive works fine on a Mac computer, and I've managed to copy the information on it. It must be a Surface issue so I'll try to get a chat line tomorrow.