Windows 10: USB 3.0 Ports only reading 2.0 devices

My windows 10 pc has two USB 3.0 ports on the front panel, which have worked as they should until yesterday. Now, the front ports will not recognize 3.0 devices, but they will read 2.0 devices. The rear ports will still read USB 3.0 devices. This has been verified with several devices, all which work correctly on another pc. The motherboard is a ASRock Z290 Taichi, and the MS updates are current.

:)

 

help with raid 0

in pre post hitting tab key

initializing usb done
12280 mb ok
usb devise 1 mouse
Auto detect sata port 1 cd
2 cd
3 ocz vertex turbo 1.4
smart capable & status ok
4 wdc ----
smart status ok
6 wdc ---
smart status ok

now I finish post and next see intel matrex storage:
raid volumes

id name level stripe size status bootable
ssd raid 0 stripe 128k 178.8 normal yes



port serial size type / status


2 ocz ---- 59.6gb member disk 0
3 wdc ---- 931.5 gb member disk 0
5 wdc --- 931.5gb member disk 0


Ok, my question is in first auto detect my ports are listed 3-4- and 6
in the intel matrix storage ports are listed 2-3- and 5 ??? is this my problem and if so how did this happen .

 

USB Port Oddities


Ok, let's see it with pictures step-by-step. First right-click on the USB device and select Update driver software:





Then select Browse my computer for driver software (LAST option) :





The select Let me pick from a list of device drivers on my computer (LAST option) :





Then select the standard driver from the list and click next:





Click next/OK as required to complete installation. Repeat the steps for all Intel USB devices. Finally click on each USB root device and press DEL to delete it, reply YES when asked. After deleting all USB root devices restart the computer.

I hope this is detailed enough...

 

"AHCI port 0 device error"

How do I prevent "AHCI port 0 device error from occurring at startup?