Windows 10: USB 3.2 Gen1 port not working at all on my laptop after switching from windows 11 to...

Specs:Asus vivobook pro 15 M6500RECPU: AMD Ryzen 7 6800HGPU: RTX 3050 ti + amd integrated graphicsRAM: 16gb DDR5Device Page on asusMy laptop came with no OS and I installed 11 but I had no good experience in it and I clean installed windows 10.So theres a USB port , which is usb 3.2 And when Installing windows 10 The usb 3.2 port works in UEFI , but when entering windows 10 it stops working simply The version of the port: USB 3.2 Gen1 every other thing works on windows 10 what worked on windows 11 except the usb 3.2 port issue more detailed: usb 3.2 gen1 port not working, whatever you plug i

:)

 

USB 2 port not working in Windows 10 on Samsung Notebook

Hi Tomale,

Thank you for posting in Microsoft Community.

Since all the USB ports are working and the problem is with the USB 3.0 port in the right side of the laptop, then this issue is with that particular port.

You can contact the manufacture of the laptop to get it done.

As a workaround, I suggest you to Run Hardware troubleshooter and check if it helps.

Follow these steps to run hardware troubleshooter.

• Type troubleshooting
  in search box.
• Select view all on the top left pane.
• Click on Hardware and Devices Troubleshooter and follow the prompts to
  run the troubleshooter.

Thanks.

 

USB 3.1 drive not recognised only on Front USB 3 ports but other devices are and works on back USB3 ports!

Hi, suddenly since today 29 July 2018 my Apacer USB 3.1 Gen1 HDD drive is not recognised on the front USB 3 ports although other devices are and it is seen on the back USB 3 ports.

It was working fine before and its just weird that all other USB devices are seen on the USB 3 ports except that specific device, but yet that specific device are seen on any USB 2 ports and back USB 3 ports.

Motherboard is a ASROCK Z370 Taichi running a Intel I7 8700 chip on Win 10 Pro fully updated.

 

USB port not working

I have an HP Pavilion dv6604nr laptop. I have 3 USB ports, 2 located on the left side and one located on the right side near the power supply port. For some reason, one of the USB ports on the left hand side will not recognize anything that is plugged
into it. I have done all the steps and suggestions that is posted on this site, and still can't get it to work. The message I get is "The last USB device that was connected has malfunctioned and Windows does not recognize it." It shows in the Device Manager
as Unknown USB Device(Port Reset Failed). When I have a USB device plugged into the non-working port, it shows up in the Devices and Printers folder, but the device does not work. I am at my wits end. Can anyone help me or suggest any other things to try?
Oh, I am running Windows 10 pro.