Windows 10: USB 3 PCIE Card issue

Reasus PCIE card installed and does work, but everytime i switch off my pc for a day or two and boot up my card does not get recognised and i have to reboot several times before it works. Trouble is my mouse and keyboard cannot function until this comes active?

Anyone have a clue what is going on??? Have re installed the drivers and all that stuff!! getting a little bit miffed every time i switch on...


Thanks in advance..

:)

 

Renesas USB 3 PCIe NEC uPD720201 not detecting USB stick

I installed Renesas PCIe USB 3 card in my PC with windows 10 pro, it was detected by windows and look working OK, when I upgrade my windows 10 to the creator version, I noted the card can still present in the device manger but it is not detecting USB sticks
or any external USB connected to it?I tried to update driver from the internet but windows search shows that the best driver is already installed for this device!

Is this driver issue or incompatibility with windows?

Any help is very much appreciated.

Thank you

 

Looking for PCIe to SATA 3 Add-in-card

I'm looking for a PCIe to SATA 3 add in card that actually works at X4 rates, that is, it must use all four lanes on the PCIe bus. The card can either provide sata connectors or permit insertion of a 2.5" SATA 3 SSD onto the card. Examples of the types of cards that would work IF they were X4 cards are seen here:
https://www.amazon.com/gp/product/B0...4RCW5MS9&psc=1
https://www.amazon.com/gp/product/B0...G9WPPLAW&psc=1


Most of these cards have X4 connectors but only work at X2 (two PCIe lanes are connected). Why is it important to me that the card work at X4? ANS: My Mobo only has PCIe slots that support PCIe Revision 1 rates. All my SATA connectors are SATA 2 connectors that don't take full advantage of my existing SATA 3 SSD boot drive so I want to add at least one SATA 3 port to the computer to speed things up. An add-in-card (or adapter card) that works at X2 would not support SATA 3 speeds on a Revision 1 PCIe bus. This is why I need a card that has a PCIe connector working at X4.

For now, I've only seen cards that work at X1 or X2 but nothing higher. My hope is someone will know where to look to find one of these cards that works at X4. Thanks for reading.

 

Renesas USB 3 PCIe NEC uPD720201 not detecting USB stick

Hi, I have downloaded this USB trouble shooter and run, after the completion it display message that the trouble shooter could not identify the problem, I looked at the device manager the USB 3 card was there no exclamation card and properties show this
device is working OK, then I noted at the device manager other devices an exclamation mark at PCI serial port (the card is PCIe), on looking at the properties the message say the drivers for this device are not installed (Code 28) there are no compatible drivers
for this device, on trying to update driver and connect USB stick, message appear that power surge on the USB port, unknown USB device need more power than the port can supply, I removed the USB stick and the uninstalled this card, but this exclamation mark
did not change on this other device, I am not sure if it is related to this USB 3 card or not.

Any more help is very much appreciated, thank you very much.