Windows 10: USB-C hub HDMI connection not working

Hi everyoneI just replaced my UDB-C hub because i had persistent audio issues. I went with a Satechi one with two HDMI ports. For it to work I followed the instructions and installed the SiliconMotion driver. The second screen lit up but is weirdly green. See the picture below. On the left what it should look like and on the right what it should not look like... ii tried changing the setting and switching cables. Also when i switched the ports the right screen worked perfectly fine but the left screen ACER would not work and displayed a prompt saying "Input not supported" which is very weird

:)

 

usb-c hub and video display

My USB-C HUB no longer displays video. The monitor is recognized I can move file and programs on the monitors but there is no vidio display (used HDMI, DP and vga connetions on the USB-C HUB. This occured after the July Windows 11 update. Any suggestions?

 

HDMI Disable

Thanks Greg for you quick reply!

I've update the drivers on my Windows. I use the same cable with no issues with the following configurations:

• Laptop with no USB-C Hub. connected through laptop hdmi port to monitor.
• Laptop with Anker HUB 7 in 1 USB-C connected throught laptop hdmi port to monitor
• Laptop with Anker HUB 7 in 1 USB-C connected throught USB-C hub hdmi port to monitor
• Laptop with Flepow 12 in 1 USB-C connected throught USB-C hub hdmi port to monitor

After that test I can prove that

The HDMI cable works and my monitor works. The only enviroment when my monitor appear have not signal is when the USB-C Hub is connected but only the Flepow.

If I disconnect the Flepow from my laptop and the laptop is connected to my monitor I have extended view in both monitor (Dell SP2309W and laptop builtin) after that I connect the Flepow extended vision works but if I restart the laptop with hub-c connected
I the laptop hdmi port do not send signal.

I send mail to flepow support but do not receive information. I think that is soming with configuration. :S

Thanks!

Guido

 

2 HDMI C docking station not working.

Hello there I have a laptop ASUS VivoBook S15 and I haven't been able to set up double monitors via C hub/ dock. I've tried to find a solution online but nothing seems to be working. Both monitors work when I connect them directly to the laptop. I've also done the following:

• update drivers.
  
• check cables and connection.
  
• Display settings ( multiple displays, detect other displays etc.)
  

laptop: ASUS VivoBook( i7, 12GB RAM, Windows 11)

Dockstation: HUB Docking Station Tipo-C, w/ Duplo HDMI , USB, VGA, RJ45, card reader, Jack 3.5mm and Tipo-C PD

link: HUB Docking Station Tipo-C, 12 em 1, com Duplo HDMI de Expansão - Goeik



Is this because of Windows 11?

Thank you in advance for your helpI

MP