Windows 10: Usb controller drive

I have an asus tuf gaming laptop, I was playing quietly and suddenly my bluetooth stopped working after restarting the laptop, it says that the usb controller is error 43, and it has 2006 drivers installed, the drivers are not updated through the control panel

:)

 

usb contected hard drive

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern regarding the issue that you are facing

I suggest you to follow the steps below and check if it helps

Method 1: Run Hardware and Devices Troubleshooter

Follow these steps to run Hardware and Devices troubleshooter:

• Press Windows key + X and click on
  Control Panel.
• Select Troubleshooting.
• Select View all on the top left corner.
• Click Hardware and Devices.
• Follow the on-screen instruction to run the troubleshooter.

Method 2:
Update USB Controllers.

To update the USB Controllers from Device Manager follow these steps.

• Go to Device manager in control panel.
• Select Device manager and a Device Manager window will pop-up.
• Double Click on USB Controllers to expand.
• Right click on the USB Controllers that is listed and select Update.

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help

 

What has happened to the additional drives that appeared in the Windows Explorer for external USB devices

Hi Alan,

Welcome to Microsoft Community. Your interest in Windows 10 is much appreciated.

For better understanding please answer the below questions:

• Does the USB drive shows in the Device Manager?
• Is the computer detecting the connected USB devices?
• Have you checked the USB drives on the different computers?

I would suggest you to try the below methods and check if that helps:

Method 1:

Check if you are able to see the USB External DVD drive in Disk Management. If you are able to see the USB External DVD drive in Disk Management, follow the steps to assign the drive letter:

• Press Windows key + X.
• Select Disk Management.
• Right-click the drive that you want to change, and then click Change Drive Letter and Paths.
  

Do one of the following:

• To assign a drive letter if one has not already been assigned, click
  Add, click the letter that you want to use, and then click OK.
• To change a drive letter, click Change, click Assign the following drive letter, click the letter that you want to use, and then click
  OK.

Method 2: I would suggest you to un-install and reinstall USB controllers and check. This method resolves steps where the currently loaded USB driver has become unstable or corrupted.

• Press Windows key + X.
• Select Device Manager.
• Expand Universal Serial Bus controllers.
• Right click a device and click Uninstall.
• Repeat for each device. Once complete, restart your computer.
• Your USB controllers will automatically install.

Keep us posted if you face any issues on windows in future. We will be glad to help you.

 

How do I fix my USB drive?

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern and will assist you to resolve this issue.

I suggest you to follow the methods below and check if it helps.

Method 1: Run the Hardware and devices troubleshooter

Windows 10 has a built-in troubleshooter to check and fix issues with hardware and devices. I would suggest you to run this troubleshooter to check if the issue is with your USB Port. Refer these steps:

• 
  Press Windows key +X, select Control panel.
  
• 
  Change the view by option on the top right to Large icons.
  
• 
  Click on troubleshooting and click on the view all option on the left panel.
  
• 
  Run the Hardware and devices troubleshooter.
  

Method 2: I suggest you to remove USB Drivers and re-install the drivers again and check if it helps.

• 
  Open Device Manager.
  
• 
  Expand Universal Serial Bus controllers.
  
• 
  Note: You might have to scroll down the list to find this item.
  
• 
  Right-click the first USB controller under
  Universal Serial Bus controllers, and then click Uninstall to remove it.
  
• 
  Repeat the above step for each USB controller that is listed under
  Universal Serial Bus controllers.
  
• 
  Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and install the drivers.
  

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.