Windows 10: usb corrupted

last year, i downloaded and extracted a file called "flashpoint" in smart tv. After 45min extract it said "extracted successfull with error". I tried to eject and plug in the usb but it not receive. And i pluged in my dad laptop windows 7 it received but it's too lag. I tried to format, checking disk, or defrag it but it say "This disk is write protected" but i don't use bitlocker or some 3rd party to lock this. I pluged in my new laptop windows 10 but i can't format, checking disk and it make my laptop boot/shut down slower than normal so how to fix that

:)

 

Programs not working

In post 26 there were steps listed to fix the operating system corruption.
Are you able to follow them?
In post 29 was the suggested dism repair command.

 

USB 3.0 is not working

I have tried below all the steps bu my both USB 3.0 are not working.

Please suggest more to add on.

I understand that the USB port is not working. The issue may arise if the currently loaded USB driver has become unstable or corrupt or if your PC requires an update for issues that may conflict with a USB device and Windows. This may also occur if your
USB controllers may have become unstable or corrupt. So, I suggest you to try the following steps and check if the issue persists.

Method 1:

Remove and reinstall all USB controllers.

Open Device Manager by pressing Windows key + X and select device manager from the list. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
In the list of hardware categories, find and expand Universal Serial Bus controllers.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and let the USB controllers get reinstalled.
Plug in the removable USB device, and then test to make sure that the issue is resolved.
Method 2

The issue could be if the drivers are not updated or get corrupted. So, try to install all of the Windows updates available and if issue persists, try to update the drivers by following the steps provided in the article mentioned below.

Update drivers in Windows 10

https://support.microsoft.com/en-in...566-b983195752c1/update-drivers-in-windows-10

Method 3

If issue persists try the steps provided to uninstall the USB device from Device Manager, uninstall the device drivers from program list and then download the latest drivers from the manufacturer's website.

Step 1:

Uninstall the Device from Device Manager

Open Device Manger by clicking on Windows key + X and selecting Device manager from the list.
Expand the USB section.
Find the USB device.
Right click USB and select Uninstall.
Select the check box delete the driver software for this device.
Reboot the computer after uninstall process has finished.
Step 2:

Uninstall the Device Drivers from Program List in Control Panel

Click on start, select Control Panel
Now click on Programs and select Programs and Features.
Find the USB.
Right click USB driver and select Uninstall.
Reboot the computer after the uninstall process has finished.
Step 3:

Download and install the latest drivers for the USB from the manufacturer website

Hope this would help. If issue still persists post back with current status of your computer and result of proposed suggestion, we will be happy to assist you.

---------
Hello Roger,

I understand that the USB port is not working. The issue may arise if the currently loaded USB driver has become unstable or corrupt or if your PC requires an update for issues that may conflict with a USB device and Windows. This may also occur if your
USB controllers may have become unstable or corrupt. So, I suggest you to try the following steps and check if the issue persists.

Method 1:

Remove and reinstall all USB controllers.

Open Device Manager by pressing Windows key + X and select device manager from the list. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
In the list of hardware categories, find and expand Universal Serial Bus controllers.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and let the USB controllers get reinstalled.
Plug in the removable USB device, and then test to make sure that the issue is resolved.
Method 2

The issue could be if the drivers are not updated or get corrupted. So, try to install all of the Windows updates available and if issue persists, try to update the drivers by following the steps provided in the article mentioned below.

Update drivers in Windows 10

https://support.microsoft.com/en-in...566-b983195752c1/update-drivers-in-windows-10

Method 3

If issue persists try the steps provided to uninstall the USB device from Device Manager, uninstall the device drivers from program list and then download the latest drivers from the manufacturer's website.

Step 1:

Uninstall the Device from Device Manager

Open Device Manger by clicking on Windows key + X and selecting Device manager from the list.
Expand the USB section.
Find the USB device.
Right click USB and select Uninstall.
Select the check box delete the driver software for this device.
Reboot the computer after uninstall process has finished.
Step 2:

Uninstall the Device Drivers from Program List in Control Panel

Click on start, select Control Panel
Now click on Programs and select Programs and Features.
Find the USB.
Right click USB driver and select Uninstall.
Reboot the computer after the uninstall process has finished.
Step 3:

Download and install the latest drivers for the USB from the manufacturer website

Hope this would help. If issue still persists post back with current status of your computer and result of proposed suggestion, we will be happy to assist you.

 

Corrupted file RAR

If the archive has been created using WinRAR, why don't you try WinRAR itself? It has a built-in repair feature for repairing corrupted archive (ZIP as well as RAR). Follow the steps given below:

• Open WinRAR application in your system.
• Now click on File tab > Open or simply press Ctrl+O.
• A small window "Find Archive" will pop up. Locate the corrupt RAR archive from your system directory and select it.
• Now click Open button.
• Click Tools tab > Repair archive or simply press Alt+R.
• Again a small window "Repairing File name.rar" will pop up.
• Now click Browse to select a location to save the repaired archive.
• Check the box "Treat the corrupt archive as RAR" and click OK.
• WinRAR will start repairing of corrupt RAR archive. Once it gets completed click Close.

I hope the above steps will help you repair the corrupted RAR archive.

Thanks.