Windows 10: USB devices won't wake up from sleep

Hi,Quite often when I reconnect some of my USB devices to PC mouse, keyboard, audio interface, they won't work. To me it seems to happen randomly. Usually it's just one of these devices that don't work when I reconnect them. Disconnecting them and again reconnecting doesn't help, the only solution is to restart the computer.It's quite annoying, as it can mean that I have to lose the opened windows session, as I can't use the keyboard or mouse, depending on which one has failed to reconnect.This issue never happens on my work laptop.I strongly feel the fault is in my Windows settings or regis

:)

 

my computer won`t wake up after goes to sleep

these computer won`t wake up after goes to sleep ?

 

wake from sleep issue in windows 10

Hi,

Thank you for posting your reply. Apologize for the delay in response.

I suggest you to check which devices are configured to wake up the computer from sleep by following the steps below:

• Right click on Start icon and select Command Prompt (Admin).
• Type the command line below:

Powercfg /devicequery wake_armed

3. Check if the devices (Keyboard, Mouse, Ethernet cable) are listed.

If the system is not going to sleep and going to Hybernate, the only option to wake up is to press the Power button.

Hope the information is helpful.

 

Troubleshooting PCs spontaneously waking from sleep

I've also battled with sleep/wake issues over the years, and from experience have learned that trying to find, or rationalise, the root cause is a waste of time. All you need is `powercfg`.

`powercfg -devicequery wake_armed` from an Administrator PowerShell window/Command Prompt will give you a list of all devices that can possibly wake the PC. This command is interesting because very often, it will show devices that you'd never expect being able to wake your computer. I think in one instance I had the chipset device listed!

`powercfg -devicedisablewake "device_name_from_device_query"`will prevent said device from ever waking the computer. This command is 100% the only thing I have found that will resolve sleep/wake problems. Updating drivers, unplugging peripherals, switching to a cleaner power supply (UPS), changing ethernet cables... none of those have helped, yet`powercfg -devicedisablewake` has done the trick.

Note that occasionally, devices you have disabled wake for may start waking up the PC again - this happens if you plug a USB device into a different port, or occasionally when drivers are updated, because Windows sees it as a new device. In that case rerun `powercfg` to find and disable that device again.

If this does not resolve your wake issues, I would start looking at power fluctuations.