Windows 10: USB Error Checking

Hello! usb had a problem. so i tried to scan and check it for repairs, but when i start the scanning and repair, nothing happens. the error checking doesn't load.what should i do? i tried it several times but i ended up powering off my computer since i can't eject my usb when it's scanning

:)

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Error 10 (device doesn't start) while trying to load a VCP to a USB serial converter on Windows 10

HI Joost,

Thank you for posting in Microsoft Community and being a part of Windows 10.

I understand your concern about accessing the USB device on your computer. Do not worry we will help you with this issue.

Do let us know the following to assist you better with this issue:

• Is this issue specific to the device (Are you able to connect any other device to your computer)?
• Were you able to see any error code/ error message along with Error 10?
• What is the make and model of your device?

Try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to run Hardware and Devices troubleshooter as it checks
for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner.
  
• Select the Hardware and Device options from the list.
  
• Click Next to run the Hardware and Device
  Troubleshooter.

Step 2: I suggest you to refer to the Microsoft support article, refer to the section Error code: 10, try the troubleshooting steps suggested and check if it helps.

Error codes in Device Manager in Windows

Step 3: I suggest you to download and install the pending updates on your computer.

Steps:

• Connect to the internet.
• Press Windows key and type
  updates.
• Click on Check for updates.
• Under Windows Updates, click on
  Check for updates.
• Try to install the updates being shown.

Hope it helps. Get back to us with an updated status of this issue for further assistance.