Windows 10: USB Hub Ports Not Working but Still Giving Power - Windows 11

Hi everyone,I got a new laptop today Razer Book 13 and the USB Hub that I've been using isn't working as expected. The USB Hub has 4 additional ports on it where I connect my keyboard, headphones, and mouse.The devices are responsive for the first minute or two after turning on my laptop but then seem to turn on and off. However, the lights on the devices All Razer devices with the bright RGB lights, seem to stay on even if the devices themselves aren't responsive. The USB Hub power indicator stays on as well.I've tried disabling Windows Security and turning off "Disable Device to Save Pow

:)

 

USB Port Issue - Power Surge on Hub Port

I have no Idea, what i suggested you check is the USB ports on your computer ensure you didn't damage them. The Hub you smoked is smoked get rid of it.
You new Hub is it self-powered? if not you probably don't have enough power going to the hub to support many devices. The flash drive plug it into a port on your computer if it works then its ok and the issue is the hub. If not you can try to run chk disk on it maybe you can fix it.

 

USB Port Issue - Power Surge on Hub Port

Hi there like to update this and want advice/feedback. I bought a brand new 4 port usb hub. I connected it to the usb port where my previous 4 port usb hub is. I only had connected my usb flash drive into the 3rd slot. When i plugged this 4 port usb hub in, it did recognize it. However, after just a bit, i hear that message where its the same one where it would mean my usb flash drive is not recognize when i click on my computer and it should show the f drive. So then i thought... okay it might be my laptop usb port that is the issue. Then i connected a keyboard to one of the 4 ports. It immediately recognized it. Thus at the moment, i did not unplug the 4 port usb hub from the usb hub on my laptop. The wired keyboard connected to it works, but did usb flash drive does not recognize. However if i were to power off that specific 3rd usb hub and power it on again or if i just unplug the entire 4 port usb hub from the usb hub on my laptop and plug it back in, it would either work or you might have to do it a few times before it recognizes the usb flash drive.


So based on this, does this mean this is 100% the usb flash drive and not my laptop usb? So what would you suggest i do now? Make sure i have everything from that flash drive and format it? The thing is it does read the usb flash drive if i were to power off and power that button. These are individual buttons that light up for each usb port.

 

No USB ports working on toshiba laptop

Hi guys,

Got an old Toshiba laptop, satellite l500d pslk0a-00r009
Its old and doesn't officially support win10. However I have it installed and everything works fine except USB. All the ports seem completely dead, plugging in a USB mouse I get no light on the mouse. USB flash drives don't work either. This was previously working under win7.

The issue seems to be I don't have "Generic USB hub" in device manager. Have tried to manually install it using add legacy hardware but it wont take. I have several USB root hub and others listed, but not the generic hub.

Here's what I have tried so far:

Uninstall all USB device in device managers and reboot
Confirmed BIOS is latest version
tried both legacy and compatibly USB mode in BIOS
Download and install generic win10 USB drivers
Disable USB power saving mode
Installed toshiba's service center, no updates available
Ran MS troubleshooter/fixit

I think the next step is to give up, but does anyone else have any suggestions?

thanks