Windows 10: USB Keyboard driver error

Hello everyoneYesterday while I was playing on my PC my keyboard suddenly stopped working and the USB connection sound thing was constantly playing.I did some research on the issue and tried some fixes that I could find but it didn't workAs you can see there are 2 keyboards even tho only one is connected via USB 3.0 and the USB Keyboard sometimes appears with a "Driver Error" messageI reinstalled Windows 11 thinking the drivers will be reinstalled properly which worked before I restarted my PC. After the restart, the issue was back and I dont know what to do

:)

 

USB keyboard disconnects when holding any button down

Hi,

Thank you for contacting Microsoft Community.

I suggest you to follow the below methods and check if it helps.

Method 1: I suggest you to try the following steps and check if it helps:

• The USB connection may be loose. Try unplugging the keyboard, and then plugging it back in.
• Plug the keyboard into a different USB port.
• If your keyboard is plugged into a USB hub or USB switch box, try removing it and plugging the keyboard into the computer.
• Unplug other USB devices that are not in use.
• Try the keyboard on another computer to verify it is working correctly

Method 2: Also I suggest you to uninstall and reinstall the usb keyboard drivers as below and check if it helps.

• Press Windows+X and go to device manager.
• Then expand keyboards and right click on the driver.
• Then click on uninstall and restart the computer.
• It will be reinstalled automatically and check if it helps.

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.

 

usb keyboard giving bios errors at boot

bios ver 0402 x64
2 usb 2 ports (i will name A and B for convinience of explanation) next to ps/2 port,this is where keyboard and mouse have always been plugged.
error message appears after asus logo and reads "keyboard not detected"
bios has not been updated no settings have ever been altered with exception of case fan controll and enabling ram xmp profile
bios set to fast boot and legacy usb enabled
desktop is used for gaming mainly and is used about 4 times a week and no faults of this nature have been experienced in the past

got the error message 2 days ago
Case 1 : keyboard in A and mouse in B
-four starts and error message is produced in 3 and windows boots normally on all starts with both devices usable at login screen and desktop environment
-three starts to check devices in bios,can use keyboard to enter bios and both devices usable and recognised (1 keyboard,1 mouse usb config under advanced settings)in bios

Case 2 : keyboard in B mouse in A
-four starts and results are similar to case 1 with exception that error message appeared on all starts

Case 3 : no device in either A or B
-error message "no keyboard or mouse detected"

Case 4 : keyboard in A or B, mouse not connected
-error message "no keyboard detected"
-can enter bios and device usable in bios and windows environment
-i couldnt navigate in bios to check listed devices as bios mainly uses the mouse

Case 5 : mouse in either A or B and keyboard in usb 3 port near lan port
-no error message, both devices usable in windows login and dektop environment
-keyboard can enter bios however if the pc is cold booted(psu turned off and on before pc power switch turned on) usb cannot be used inside bios,though if i continue to windows and reboot it is completely functional regardless of number of restarts

now i have no idea what to make of results in case 4 because that would mean the the keyboard was being identified as mouse
also in case 1 keyboard did boot once with no errors so maybe the keyboard is malfunctioning but it cold start doing the same in usb 3 later or does it have a problem with usb 2
i hoped i could get insight before i get a new keyboard or change bios settings or flash it
its my first build, i dont want to break anything with haste (this stuff is expensive as ....!!!) and i only have a samsung np550pc to fallback on (i cant game on that once again)